Ka-band high efficiency 1 watt power amplifier

1992 IEEE Microwave Symposium Digest MTT-S Pub Date : 1992-06-01 DOI:10.1109/MWSYM.1992.188048

G. Dow, K. Tan, N. Ton, J. Abell, M. Siddiqui, B. Gorospe, D. Streit, P. Liu, M. Sholley

引用次数: 12

Abstract

The authors describe the design and performance of a miniaturized 35-GHz power amplifier. The two-stage amplifier has achieved an output power of 1 W with an associated gain of 10 dB and a power-added efficiency of 25.1%. The design is based on a TRW 0.25- mu m T-gate pseudomorphic InGaAs high electron mobility transistor (HEMT) device technology. The amplifier was designed using a 1-mm device driving a 2-mm device. The complete amplifier mounted on a carrier is 0.26 in*0.16 in*0.02 in. The amplifier results reported here represent the best power gain and efficiency performances achieved from a single amplifier at 35 GHz.<>

查看原文本刊更多论文

ka波段高效率1瓦功率放大器

介绍了一种小型化35ghz功率放大器的设计和性能。两级放大器的输出功率为1 W，相关增益为10 dB，功率增加效率为25.1%。该设计基于TRW 0.25 μ m t栅假晶InGaAs高电子迁移率晶体管(HEMT)器件技术。放大器的设计采用1毫米器件驱动2毫米器件。安装在载波上的完整放大器是0.26英寸*0.16英寸*0.02英寸。这里报告的放大器结果代表了35ghz频段单个放大器的最佳功率增益和效率性能

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

1992 IEEE Microwave Symposium Digest MTT-S

自引率

0.00%

发文量