Modelling of forming processes using the Particle Finite Element Method (PFEM)

15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII) Pub Date : 1900-01-01 DOI:10.23967/wccm-apcom.2022.073

J. Carbonell, H. Bakhshan, J. Rodríguez, E. Oñate

引用次数: 0

Abstract

* MECAMAT group, Department of Engineering, Faculty of Science and Technology. Universitat de Vic-Universitat Central de Catalunya (UVic-UCC) Carrer de la Laura 13, 08500 Vic, Spain. e-mail: cpuigbo@cimne.upc.edu ‡ Department of Mechanical Engineering, EAFIT University, Medellin, Colombia, South America. e-mail: 3 jmrodrigup@eafit.edu.co † Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE) Universidad Politècnica de Catalunya (UPC) Campus Norte UPC, 08034 Barcelona, Spain e-mails: hbakhshan@cimne.upc.edu, onate@cimne.upc.edu

查看原文本刊更多论文

基于粒子有限元法的成形过程建模

* MECAMAT 小组，科技学院工程系。电子邮箱：cpuigbo@cimne.upc.edu ‡ 南美哥伦比亚麦德林 EAFIT 大学机械工程系。电子邮箱：3 cpuigbo@cimne.upc.edu † 国际数模转换中心（CIMNE），西班牙 Politèn 大学：3 jmrodrigup@eafit.edu.co † Centre Internacional de Mètodes Numèrics en Enginyeria (CIMNE) Universidad Politècnica de Catalunya (UPC) Campus Norte UPC, 08034 Barcelona, Spain e-mails: hbakhshan@cimne.upc.edu, onate@cimne.upc.edu

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

15th World Congress on Computational Mechanics (WCCM-XV) and 8th Asian Pacific Congress on Computational Mechanics (APCOM-VIII)

自引率

0.00%

发文量