Comparative Low-Cycle Fatigue Behavior of HAYNES 244 Alloy and Waspaloy

Abstract

HAYNES® 244® alloy was chiefly developed to address the need for high-strength, low coefficient of thermal expansion (CTE) alloys for seal rings and cases in advanced gas turbine engines. In addition to these attributes, adequate resistance to low-cycle fatigue (LCF) due to cyclic thermal and mechanical loading during service is critical for such applications. The isothermal LCF performance of commercially produced 0.5” (12.5 mm) thick, fully heat treated plate products of 244 alloy was evaluated by means of axial strain-controlled (R = −1) LCF tests covering total strain ranges up to 1.25 % (without dwells), at temperatures ranging from 800–1400°F (427–760°C). In addition, the comparative LCF performance of Waspaloy, a well-established alloy for turbine cases, was evaluated under selected, nominally identical test conditions. S-N curves were constructed and fitted by the Coffin-Manson equation, allowing the delineation of regimes controlled by the elastic and plastic response of the material. Fracture surfaces were examined in the scanning electron microscope to identify fatigue crack initiation sites and crack propagation modes. Differences between the alloys are discussed in terms of tensile strength and cyclic hardening/softening behavior. Implications for fatigue performance of these alloys under cyclic thermal loading conditions are discussed as well.