[Reactions at the nonprecious metal-ceramic interface during porcelain firing. (3) A commercial alloy forming much Cr oxide during firing].

Abstract

To examine the interface reaction between porcelain and a commercial Ni-Cr dental alloy (containing higher Cr and Mo) during porcelain firing, electron probe microanalyzer (EPMA) and X-ray diffraction have been used to characterize the interface which has emerged by means of selective dissolution of the alloy caused by a bromine-methanol solution. Much Cr oxide was formed at the early stage of firing, and remained in the reaction layer even if the holding time at 960 degrees C was up to 8 minutes. As a result, many Cr atoms diffused into the porcelain layer, most of which was found to form oxides through X-ray diffraction. Moreover, the porcelain layer nearest to the oxide layer was deduced to be modified seriously.