Ping-Yi Wang, Te-Lin Wu, Min-Chih Chou, Ming-Yu Chen, Yin-Cheng Chang, D. Chang, S. Hsu
{"title":"Design of wideband sub-harmonic receiver front-end using 0.18-µm BiCMOS technology","authors":"Ping-Yi Wang, Te-Lin Wu, Min-Chih Chou, Ming-Yu Chen, Yin-Cheng Chang, D. Chang, S. Hsu","doi":"10.1109/IEEE-IWS.2015.7164610","DOIUrl":null,"url":null,"abstract":"A low-power sub-harmonic receiver front-end covering an RF frequency range of 18-21GHz with a converted IF range of 50-1550 MHz is demonstrated. The transformer-based inductive coupled resonators at the input of low-noise amplifier provide a wideband signal transformation and impedance matching effectively. Also, several circuit techniques such as GM boosted and 3D-inductors are employed for the LNA and mixer to achieve high circuit performance. The proposed receiver is fabricated using 0.18-μm SiGe BiCMOS technology with a total power consumption of 60 mW. Measured results show that the conversion gain is of 36 dB featuring an excellent gain flatness (±1dB) with the IF bandwidth up to 1.5 GHz, noise figure lower than 8.5 dB, and output P1dB compression point higher than 3 dBm for the IF frequency, respectively.","PeriodicalId":164534,"journal":{"name":"2015 IEEE International Wireless Symposium (IWS 2015)","volume":"34 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2015-07-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2015 IEEE International Wireless Symposium (IWS 2015)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/IEEE-IWS.2015.7164610","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1
Abstract
A low-power sub-harmonic receiver front-end covering an RF frequency range of 18-21GHz with a converted IF range of 50-1550 MHz is demonstrated. The transformer-based inductive coupled resonators at the input of low-noise amplifier provide a wideband signal transformation and impedance matching effectively. Also, several circuit techniques such as GM boosted and 3D-inductors are employed for the LNA and mixer to achieve high circuit performance. The proposed receiver is fabricated using 0.18-μm SiGe BiCMOS technology with a total power consumption of 60 mW. Measured results show that the conversion gain is of 36 dB featuring an excellent gain flatness (±1dB) with the IF bandwidth up to 1.5 GHz, noise figure lower than 8.5 dB, and output P1dB compression point higher than 3 dBm for the IF frequency, respectively.