Sub-1.3 dB noise figure direct-coupled MMIC LNAs using a high current-gain 1-/spl mu/m GaAs HBT technology

K. Kobayashi, L. Tran, M. Lammert, T. Block, P. Grossman, A. Oki, D. Streit
{"title":"Sub-1.3 dB noise figure direct-coupled MMIC LNAs using a high current-gain 1-/spl mu/m GaAs HBT technology","authors":"K. Kobayashi, L. Tran, M. Lammert, T. Block, P. Grossman, A. Oki, D. Streit","doi":"10.1109/GAAS.1997.628278","DOIUrl":null,"url":null,"abstract":"Here we report on direct-coupled HBT MMIC LNAs which achieve sub-1.3 dB noise figures up to 2 GHz. This is believed to be the lowest noise figure (NF) reported for a 50/spl Omega/ MMIC-matched LNA in this frequency range. The LNAs are based on a new 1-/spl mu/m GaAs HBT technology which provides high DC current gains of >400 and f/sub T/'s in excess of 40 GHz and enables low broadband amplifier noise figure performance. A DC-3.2 GHz HBT LNA (DCLNA2) design achieves a gain of 24.6 dB and sub-1.3 dB NF up to 2 GHz while consuming only 7.8 mA of current. The minimum LNA noise figure is 1.22 dB at 1.5 GHz. A DC-6 GHz design (DCLNA1) achieves 26.1 dB gain and a NF less than 2 dB up to 4 GHz while consuming 16.4 mA. The NF at 6 GHz is 2.52 dB with a corresponding IP3 of 11 dBm. These HBT MMICs provide a low cost LNA solution for receiver applications encompassing the industrial-scientific-medical (ISM) wireless bands.","PeriodicalId":299287,"journal":{"name":"GaAs IC Symposium. IEEE Gallium Arsenide Integrated Circuit Symposium. 19th Annual Technical Digest 1997","volume":"13 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1997-10-12","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"16","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"GaAs IC Symposium. IEEE Gallium Arsenide Integrated Circuit Symposium. 19th Annual Technical Digest 1997","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/GAAS.1997.628278","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 16

Abstract

Here we report on direct-coupled HBT MMIC LNAs which achieve sub-1.3 dB noise figures up to 2 GHz. This is believed to be the lowest noise figure (NF) reported for a 50/spl Omega/ MMIC-matched LNA in this frequency range. The LNAs are based on a new 1-/spl mu/m GaAs HBT technology which provides high DC current gains of >400 and f/sub T/'s in excess of 40 GHz and enables low broadband amplifier noise figure performance. A DC-3.2 GHz HBT LNA (DCLNA2) design achieves a gain of 24.6 dB and sub-1.3 dB NF up to 2 GHz while consuming only 7.8 mA of current. The minimum LNA noise figure is 1.22 dB at 1.5 GHz. A DC-6 GHz design (DCLNA1) achieves 26.1 dB gain and a NF less than 2 dB up to 4 GHz while consuming 16.4 mA. The NF at 6 GHz is 2.52 dB with a corresponding IP3 of 11 dBm. These HBT MMICs provide a low cost LNA solution for receiver applications encompassing the industrial-scientific-medical (ISM) wireless bands.
采用高电流增益1-/spl μ m GaAs HBT技术的噪声系数低于1.3 dB的直接耦合MMIC LNAs
在这里,我们报告了直接耦合的HBT MMIC LNAs,其噪声数字高达2 GHz,低于1.3 dB。这被认为是在该频率范围内报道的50/spl Omega/ mmic匹配LNA的最低噪声系数(NF)。lna基于新的1-/spl mu/m GaAs HBT技术,该技术提供>400的高直流电流增益和超过40 GHz的f/sub T/ s,并实现低宽带放大器噪声系数性能。DC-3.2 GHz HBT LNA (DCLNA2)设计在2ghz下实现24.6 dB增益和低于1.3 dB的NF,同时仅消耗7.8 mA电流。在1.5 GHz时,最小LNA噪声系数为1.22 dB。dc - 6ghz设计(DCLNA1)在4ghz时可实现26.1 dB增益和小于2db的NF,而功耗为16.4 mA。6ghz时的NF为2.52 dB,对应的IP3为11dbm。这些HBT mmic为包含工业-科学-医疗(ISM)无线频段的接收器应用提供了低成本的LNA解决方案。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信