Design of a POF receiver with integrated photodiode in 0.5µm BCD process

2011 IEEE International Conference on Anti-Counterfeiting, Security and Identification Pub Date : 2011-06-24 DOI:10.1109/ASID.2011.5967450

Jifang Li, Huangping Yan, Xiang Cheng, Yuanqing Huang

引用次数: 3

Abstract

Design of a plastic optical fiber (POF) receiver with integrated photodiode in 0.5µm BCD process is presented in the report. The receiver is intended to be used in the inbuilding network with POF, diameter 1mm wavelength 650nm. The receiver consists of an integrated PIN with 200µm*200µm, a transimpedance amplifier (TIA) with an automatic gain control (AGC) loop and a post amplifier. The simulated −3dB frequency is shown up to 156.5MHz. 102.3 dBΩ simulated transimpedance gain is achieved.

查看原文本刊更多论文

0.5µm BCD工艺中集成光电二极管的POF接收机设计

本文介绍了一种采用0.5µm BCD工艺的集成光电二极管的塑料光纤(POF)接收器的设计。本接收机拟用于楼内POF网络，直径1mm，波长650nm。该接收器由一个200µm*200µm的集成PIN、一个带自动增益控制(AGC)回路的跨阻放大器(TIA)和一个后置放大器组成。−3dB的仿真频率高达156.5MHz。102.3 dBΩ模拟跨阻增益。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2011 IEEE International Conference on Anti-Counterfeiting, Security and Identification

自引率

0.00%

发文量