Reduction of Total Suspended Solids, Turbidity and Colour of Palm Oil Mill Effluent using Hybrid Coagulation-Fltrafiltration Process

W. Q. Ng, S. Lai, K. C. Chong, S. S. Lee, C. Koo, W. Chong
{"title":"Reduction of Total Suspended Solids, Turbidity and Colour of Palm Oil Mill Effluent using Hybrid Coagulation-Fltrafiltration Process","authors":"W. Q. Ng, S. Lai, K. C. Chong, S. S. Lee, C. Koo, W. Chong","doi":"10.11113/AMST.V23N1.144","DOIUrl":null,"url":null,"abstract":"High consumption and production of palm oil have led to the massive generation of palm oil mill effluent (POME). This study was intended to reduce the total suspended solids (TSS), turbidity and colour using hybrid coagulation-ultrafiltration process. POME was pre-treated with coagulation process using polyaluminium chloride (PAC) and optimization of operating condition for coagulation process was performed. The coagulation results revealed that optimum pH, dosage of coagulant and rapid mixing speed were pH 4, 600 mg/L and 200 rpm, respectively. It achieved the highest percent reduction of TSS, turbidity and colour with 99.74%, 94.44% and 94.60%, respectively. Ultrafiltration (UF) membrane was fabricated using polyethersulfone (PES), polyvinylpyrrolidone (PVP) and titanium dioxide (TiO2­) nanoparticle. Different concentrations ranging from zero and 1.0 wt% of TiO2 nanoparticles were added into the dope solution. The characterization studies of UF membranes confirmed that higher concentration of TiO2 provided higher pure water permeability and more porous structure in the UF membranes. The amount of TiO2 in membrane only affected the permeate flux but had no obvious effects on the reduction of TSS, turbidity and colour. The optimum transmembrane pressure was found to be 3 bar, resulting in the greatest reduction of TSS, turbidity and colour.","PeriodicalId":326334,"journal":{"name":"Journal of Applied Membrane Science & Technology","volume":"11 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2018-12-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"5","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Journal of Applied Membrane Science & Technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.11113/AMST.V23N1.144","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 5

Abstract

High consumption and production of palm oil have led to the massive generation of palm oil mill effluent (POME). This study was intended to reduce the total suspended solids (TSS), turbidity and colour using hybrid coagulation-ultrafiltration process. POME was pre-treated with coagulation process using polyaluminium chloride (PAC) and optimization of operating condition for coagulation process was performed. The coagulation results revealed that optimum pH, dosage of coagulant and rapid mixing speed were pH 4, 600 mg/L and 200 rpm, respectively. It achieved the highest percent reduction of TSS, turbidity and colour with 99.74%, 94.44% and 94.60%, respectively. Ultrafiltration (UF) membrane was fabricated using polyethersulfone (PES), polyvinylpyrrolidone (PVP) and titanium dioxide (TiO2­) nanoparticle. Different concentrations ranging from zero and 1.0 wt% of TiO2 nanoparticles were added into the dope solution. The characterization studies of UF membranes confirmed that higher concentration of TiO2 provided higher pure water permeability and more porous structure in the UF membranes. The amount of TiO2 in membrane only affected the permeate flux but had no obvious effects on the reduction of TSS, turbidity and colour. The optimum transmembrane pressure was found to be 3 bar, resulting in the greatest reduction of TSS, turbidity and colour.
混凝-过滤混合工艺降低棕榈油厂废水的总悬浮物、浊度和颜色
棕榈油的大量消费和生产导致棕榈油厂废水(POME)的大量产生。本研究旨在采用混凝-超滤混合工艺降低总悬浮物(TSS)、浊度和颜色。采用聚合氯化铝(PAC)对POME进行混凝预处理,并对混凝工艺操作条件进行了优化。混凝试验结果表明,混凝剂的最佳pH为4,投加量为600 mg/L,快速搅拌速度为200 rpm。TSS、浊度和色度的降低率最高,分别为99.74%、94.44%和94.60%。采用聚醚砜(PES)、聚乙烯吡咯烷酮(PVP)和二氧化钛(TiO2 -)纳米颗粒制备超滤膜(UF)。在掺杂溶液中加入不同浓度的TiO2纳米粒子,浓度从0 wt%到1.0 wt%不等。对超滤膜的表征研究证实,TiO2浓度越高,超滤膜的纯水渗透性越高,多孔性越强。膜中TiO2的添加量仅影响渗透通量,对TSS、浊度和颜色的还原无明显影响。最佳跨膜压力为3 bar,可最大程度地降低TSS、浊度和颜色。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信