V. d’Alessandro, C. Maneux, G. Fischer, K. Aufinger, A. Magnani, S. Russo, N. Rinaldi
{"title":"5. Reliability","authors":"V. d’Alessandro, C. Maneux, G. Fischer, K. Aufinger, A. Magnani, S. Russo, N. Rinaldi","doi":"10.7591/9781501719103-008","DOIUrl":null,"url":null,"abstract":"An important reliability concern in SiGe HBTs is related to long-term degradation (stress or aging) effects induced by hot carriers (HCs). While in MOSFETs HC mechanisms produce a degradation of drain current and transconductance, as well as a threshold voltage shift [Tya15], in bipolar transistors the HC damage is mainly related to the creation of Si dangling bonds acting as trap states at the semiconductor–insulator interfaces. Interface traps induced during device operation lead to an increased Shockley–Read– Hall (SRH) recombination and hence to an excess non-ideal base current component. Differently from MOSFETs, the collector current remains unaffected, and therefore it can in principle be stated that HC degradation is less critical in bipolar transistors, including the SiGe HBT technology; however, it still entails a number of undesirable consequences, such as current gain reduction (due to the base current growth), noise figure increase, shift of the bias point outside of the functional range, as well as increased power consumption in power amplifiers [Ven00, Cre04, Che09]. Such effects have been traditionally studied under reverse base–emitter stress conditions, where HCs are created by large electric fields across the base–emitter junction (see the early papers [Bur88, Gog00] and the more recent [Sas14a, Sas14b,","PeriodicalId":410258,"journal":{"name":"Southeast Asian Ephemeris","volume":"26 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2018-12-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Southeast Asian Ephemeris","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.7591/9781501719103-008","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1
Abstract
An important reliability concern in SiGe HBTs is related to long-term degradation (stress or aging) effects induced by hot carriers (HCs). While in MOSFETs HC mechanisms produce a degradation of drain current and transconductance, as well as a threshold voltage shift [Tya15], in bipolar transistors the HC damage is mainly related to the creation of Si dangling bonds acting as trap states at the semiconductor–insulator interfaces. Interface traps induced during device operation lead to an increased Shockley–Read– Hall (SRH) recombination and hence to an excess non-ideal base current component. Differently from MOSFETs, the collector current remains unaffected, and therefore it can in principle be stated that HC degradation is less critical in bipolar transistors, including the SiGe HBT technology; however, it still entails a number of undesirable consequences, such as current gain reduction (due to the base current growth), noise figure increase, shift of the bias point outside of the functional range, as well as increased power consumption in power amplifiers [Ven00, Cre04, Che09]. Such effects have been traditionally studied under reverse base–emitter stress conditions, where HCs are created by large electric fields across the base–emitter junction (see the early papers [Bur88, Gog00] and the more recent [Sas14a, Sas14b,