Geology-Based Modeling of Capillary Pressure in Cretaceous Carbonates

M. Dernaika, S. Masalmeh, Bashar Mansour, O. Aljallad, S. Koronfol
{"title":"Geology-Based Modeling of Capillary Pressure in Cretaceous Carbonates","authors":"M. Dernaika, S. Masalmeh, Bashar Mansour, O. Aljallad, S. Koronfol","doi":"10.2118/212596-ms","DOIUrl":null,"url":null,"abstract":"\n Primary drainage capillary pressure data are essential input for static modelling of hydrocarbon reservoirs, estimate both oil and gas volumes in place and model saturation distribution. The behavior of the primary drainage curve is controlled by the pore throat size distribution, where a much wider pore throat size distribution is observed for heterogenous reservoirs. The objective of this paper is to determine capillary pressure modeling parameters for a wide range of geological textures of carbonate reservoirs covering different porosity and permeability ranges.\n Representative core plugs were studied from different cretaceous carbonate reservoirs across the Middle East region. The data set available included laboratory-measured helium porosity, gas permeability, thin-section photomicrographs, and high-pressure mercury injection. The samples were grouped into 25 different rock types based on geological interpretation and capillary pressure data while honoring the porosity-permeability trends within identified textures (i.e., grainy, mixed, and muddy).\n The capillary pressure data were matched using analytical equations with fitting model parameters (i.e., cwd and awd). The different rock types showed wide range of model parameters that could be linked to the different textures and the porosity-permeability distribution. Correlations between model parameters and rock properties (i.e., porosity, permeability, and texture) were derived, which could be used to predict capillary pressure curves from porosity and permeability in relatively less heterogeneous RRTs.\n Rock types were successfully classified within different textures based on porosity, permeability, and capillarity. The capillary pressure modeling parameters provided more insight into the effects of geology on capillary pressure and saturation; and made it possible to quantify heterogeneity within different geological groups.","PeriodicalId":155277,"journal":{"name":"Day 3 Thu, January 26, 2023","volume":"1 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-01-24","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Day 3 Thu, January 26, 2023","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.2118/212596-ms","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

Primary drainage capillary pressure data are essential input for static modelling of hydrocarbon reservoirs, estimate both oil and gas volumes in place and model saturation distribution. The behavior of the primary drainage curve is controlled by the pore throat size distribution, where a much wider pore throat size distribution is observed for heterogenous reservoirs. The objective of this paper is to determine capillary pressure modeling parameters for a wide range of geological textures of carbonate reservoirs covering different porosity and permeability ranges. Representative core plugs were studied from different cretaceous carbonate reservoirs across the Middle East region. The data set available included laboratory-measured helium porosity, gas permeability, thin-section photomicrographs, and high-pressure mercury injection. The samples were grouped into 25 different rock types based on geological interpretation and capillary pressure data while honoring the porosity-permeability trends within identified textures (i.e., grainy, mixed, and muddy). The capillary pressure data were matched using analytical equations with fitting model parameters (i.e., cwd and awd). The different rock types showed wide range of model parameters that could be linked to the different textures and the porosity-permeability distribution. Correlations between model parameters and rock properties (i.e., porosity, permeability, and texture) were derived, which could be used to predict capillary pressure curves from porosity and permeability in relatively less heterogeneous RRTs. Rock types were successfully classified within different textures based on porosity, permeability, and capillarity. The capillary pressure modeling parameters provided more insight into the effects of geology on capillary pressure and saturation; and made it possible to quantify heterogeneity within different geological groups.
基于地质的白垩纪碳酸盐岩毛管压力模拟
原生排水毛管压力数据是油藏静态建模、估算油气储量和饱和度分布的重要输入。原生排水曲线的行为受孔喉尺寸分布的控制,非均质储层的孔喉尺寸分布要宽得多。本文的目的是确定覆盖不同孔隙度和渗透率范围的碳酸盐岩储层的大范围地质结构的毛细管压力建模参数。对中东地区不同白垩系碳酸盐岩储层具有代表性的岩心塞进行了研究。可用的数据集包括实验室测量的氦孔隙度、气体渗透率、薄层显微照片和高压压汞。根据地质解释和毛管压力数据,将样品分为25种不同的岩石类型,同时考虑到已识别结构(即颗粒状、混合和泥质)的孔隙度-渗透率趋势。毛细管压力数据使用解析方程与拟合模型参数(即cwd和awd)进行匹配。不同的岩石类型表现出广泛的模型参数,这些参数可以与不同的结构和孔渗分布联系起来。推导了模型参数与岩石性质(即孔隙度、渗透率和结构)之间的相关性,可用于预测相对非均质性较小的RRTs中孔隙度和渗透率的毛管压力曲线。根据孔隙度、渗透率和毛细度,成功地将岩石类型划分为不同的结构。毛管压力模拟参数提供了地质条件对毛管压力和饱和度的影响;并使量化不同地质组的异质性成为可能。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书