Direct microscopic observation of hologram build-up in photorefractive crystals

I. Bányász, G. Mandula
{"title":"Direct microscopic observation of hologram build-up in photorefractive crystals","authors":"I. Bányász, G. Mandula","doi":"10.1117/12.676515","DOIUrl":null,"url":null,"abstract":"A method, based on phase-contrast and interference microscopy, was developed for direct microscopic observation of temporal evolution of phase holograms in photorefractive crystals. Interference microscopy was adapted to the study of photorefractive holograms. First a hologram was recorded in the sample, and diffraction efficiency was monitored during hologram build-up using inactinic laser light. Thus kinetics of hologram build-up could be determined. The initial hologram was erased using white light. Then a series of write-erase cycles were performed with increasing exposure times up to an exposure corresponding to saturation of the grating. Holograms were observed by interference microscope after each exposure. The time elapsed between the exposure and the microscopic observation was negligible compared to the relaxation time of the hologram. The obtained temporal evolution of grating profile gives a deeper insight into the physical mechanism of hologram formation in photorefractive materials than diffraction efficiency measurements. Congruently grown samples of LiNbO3: Fe, with Fe concentrations in melting of 10-3 were studied by the above method. Sample thickness was set to 300 μm to allow correct microscopic observation. Plane-wave holograms were recorded in the samples using an Ar-ion laser at λ=514 nm of grating constants of 3.3 and 7.0 μm.","PeriodicalId":266048,"journal":{"name":"International Conference on Holography, Optical Recording, and Processing of Information","volume":"3 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2006-05-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Conference on Holography, Optical Recording, and Processing of Information","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1117/12.676515","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

A method, based on phase-contrast and interference microscopy, was developed for direct microscopic observation of temporal evolution of phase holograms in photorefractive crystals. Interference microscopy was adapted to the study of photorefractive holograms. First a hologram was recorded in the sample, and diffraction efficiency was monitored during hologram build-up using inactinic laser light. Thus kinetics of hologram build-up could be determined. The initial hologram was erased using white light. Then a series of write-erase cycles were performed with increasing exposure times up to an exposure corresponding to saturation of the grating. Holograms were observed by interference microscope after each exposure. The time elapsed between the exposure and the microscopic observation was negligible compared to the relaxation time of the hologram. The obtained temporal evolution of grating profile gives a deeper insight into the physical mechanism of hologram formation in photorefractive materials than diffraction efficiency measurements. Congruently grown samples of LiNbO3: Fe, with Fe concentrations in melting of 10-3 were studied by the above method. Sample thickness was set to 300 μm to allow correct microscopic observation. Plane-wave holograms were recorded in the samples using an Ar-ion laser at λ=514 nm of grating constants of 3.3 and 7.0 μm.
光折变晶体中全息图形成的直接显微观察
提出了一种基于相衬和干涉显微技术直接显微观察光折变晶体中相位全息图时间演化的方法。干涉显微镜适用于光折变全息图的研究。首先在样品中记录全息图,并在全息图构建过程中使用非光化激光监测衍射效率。这样就可以确定全息图形成的动力学。最初的全息图是用白光擦除的。然后,随着曝光时间的增加,进行一系列的写入擦除循环,直到与光栅的饱和相对应的曝光。每次曝光后用干涉显微镜观察全息图。与全息图的松弛时间相比,曝光和显微观察之间的时间可以忽略不计。与衍射效率测量相比,获得的光栅轮廓的时间演化可以更深入地了解光折变材料中全息图形成的物理机制。用上述方法研究了10-3熔体中铁浓度为1 -3的同生长LiNbO3: Fe样品。样品厚度设置为300 μm,以便进行正确的显微观察。利用波长为λ=514 nm、光栅常数为3.3和7.0 μm的ar离子激光器,在样品中记录了平面波全息图。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信