Noise radar for range/Doppler processing and digital beamforming using binary ADC

IGARSS 2001. Scanning the Present and Resolving the Future. Proceedings. IEEE 2001 International Geoscience and Remote Sensing Symposium (Cat. No.01CH37217) Pub Date : 2001-07-09 DOI:10.1109/IGARSS.2001.977884

S. Axelsson

引用次数: 8

Abstract

Presently, there is an increasing interest in noise modulated radar. Wide-band signal processing with high range resolution, reduced ambiguities and high ECCM performance can be achieved. The processing involved correlates the received signal and the delayed reference. Range/Doppler processing and digital beamforming can be performed with surprisingly good results even for binary or a few bits ADC, if a second noise signal is added before.

查看原文本刊更多论文

目前，噪声调制雷达受到越来越多的关注。宽频带信号处理具有高距离分辨率、减少歧义和高ECCM性能。所涉及的处理将接收到的信号和延迟的参考相关联。距离/多普勒处理和数字波束形成即使对于二进制或几位ADC，如果在之前添加第二个噪声信号，也可以获得令人惊讶的好结果。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

IGARSS 2001. Scanning the Present and Resolving the Future. Proceedings. IEEE 2001 International Geoscience and Remote Sensing Symposium (Cat. No.01CH37217)

自引率

0.00%

发文量