A 28 GHz 22FDX® PA with 31.5 % Peak PAE and Output Power of 21 dBm in CW, 18.5 dBm in QPSK, and 12.5 dBm in 64QAM

Z. Al-Husseini, S. Syed, P. V. Testa, G. Katzman, G. Bossu, Z. Zhao, S. Moss, C. Tianbing
{"title":"A 28 GHz 22FDX® PA with 31.5 % Peak PAE and Output Power of 21 dBm in CW, 18.5 dBm in QPSK, and 12.5 dBm in 64QAM","authors":"Z. Al-Husseini, S. Syed, P. V. Testa, G. Katzman, G. Bossu, Z. Zhao, S. Moss, C. Tianbing","doi":"10.23919/EuMC54642.2022.9924479","DOIUrl":null,"url":null,"abstract":"A 22nm FD-SOI Power Amplifier (PA) for 5G communication at 28 GHz is demonstrated. A dual-stage approach together with stacking techniques and optimized transistor-interconnection layout is used to achieve a measured peak PAE above 31% with an output power of 21.0 dBm. Besides output power and PAE, the PA demonstrated 12.5 dBm at −28 dB EVM with 64-QAM CF -OFDM 5G modulated signal and 18.5 dBm with DFT-s-OFDM QPSK modulated signal at −19 dB ACLR with 100-MHz bandwidth with a linear PAE of 20%. To the best of the authors knowledge, the presented PA shows the highest linear power and efficiency with QPSK while its 64-QAM modulated output power outperforms by 1 dB the state of the art while also reducing the EVM by 1 dB, when compared against 2-stage PA silicon implementations. Finally, an output-power degradation below 0.05 dB after 66 hours of stress at 21 dBm power level has been shown to demonstrate excellent reliability.","PeriodicalId":215592,"journal":{"name":"2022 52nd European Microwave Conference (EuMC)","volume":"7 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-09-27","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2022 52nd European Microwave Conference (EuMC)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.23919/EuMC54642.2022.9924479","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 3

Abstract

A 22nm FD-SOI Power Amplifier (PA) for 5G communication at 28 GHz is demonstrated. A dual-stage approach together with stacking techniques and optimized transistor-interconnection layout is used to achieve a measured peak PAE above 31% with an output power of 21.0 dBm. Besides output power and PAE, the PA demonstrated 12.5 dBm at −28 dB EVM with 64-QAM CF -OFDM 5G modulated signal and 18.5 dBm with DFT-s-OFDM QPSK modulated signal at −19 dB ACLR with 100-MHz bandwidth with a linear PAE of 20%. To the best of the authors knowledge, the presented PA shows the highest linear power and efficiency with QPSK while its 64-QAM modulated output power outperforms by 1 dB the state of the art while also reducing the EVM by 1 dB, when compared against 2-stage PA silicon implementations. Finally, an output-power degradation below 0.05 dB after 66 hours of stress at 21 dBm power level has been shown to demonstrate excellent reliability.
一个28 GHz 22FDX®放大器,峰值PAE为31.5%,连续波输出功率为21 dBm, QPSK输出功率为18.5 dBm, 64QAM输出功率为12.5 dBm
介绍了一种用于5G通信的22nm FD-SOI功率放大器(PA)。采用双级方法、叠加技术和优化的晶体管互连布局,测量峰值PAE达到31%以上,输出功率为21.0 dBm。除了输出功率和PAE外,该放大器在−28 dB EVM下具有64-QAM CF -OFDM 5G调制信号12.5 dBm,在−19 dB ACLR下具有DFT-s-OFDM QPSK调制信号18.5 dBm,带宽为100 mhz,线性PAE为20%。据作者所知,采用QPSK的PA显示出最高的线性功率和效率,而其64-QAM调制输出功率比目前的技术水平高出1 dB,同时EVM也比2级PA硅实现降低了1 dB。最后,在21 dBm功率水平下工作66小时后,输出功率衰减低于0.05 dB,证明了出色的可靠性。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信