Virtual wires: overcoming pin limitations in FPGA-based logic emulators

Abstract

Existing FPGA-based logic emulators only use a fraction of potential communication bandwidth because they dedicate each FPGA pin (physical wire) to a single emulated signal (logical wire). Virtual wires overcome pin limitations by intelligently multiplexing each physical wire among multiple logical wires and pipelining these connections at the maximum clocking frequency of the FPGA. A virtual wire represents a connection from a logical output on one FPGA to a logical input on another FPGA. Virtual wires not only increase usable bandwidth, but also relax the absolute limits imposed on gate utilization. The resulting improvement in bandwidth reduces the need for global interconnect, allowing effective use of low dimension inter-chip connections (such as nearest-neighbor). Nearest-neighbor topologies, coupled with the ability of virtual wires to overlap communication with computation, can even improve emulation speeds. The authors present the concept of virtual wires and describe their first implementation, a 'softwire' compiler which utilizes static routing and relies on minimal hardware support. Results from compiling netlists for the 18 K gate Sparcle microprocessor and the 86 K gate Alewife Communications and Cache Controller indicate that virtual wires can increase FPGA gate utilization beyond 80 percent without a significant slowdown in emulation speed.<>