Feasibility of non-linear analysis of the BEoL structure in a flip chip package under thermal shock

T. Raman, F. Mirza, D. Agonafer, K. Lawrence
{"title":"Feasibility of non-linear analysis of the BEoL structure in a flip chip package under thermal shock","authors":"T. Raman, F. Mirza, D. Agonafer, K. Lawrence","doi":"10.1109/SEMI-THERM.2013.6526817","DOIUrl":null,"url":null,"abstract":"Miniaturization and more recently convergence have been driving the industry since the invention of the transistor and integrated circuit (IC). Though the gate delay has decreased with transistor scaling, the increase in the resistive capacitive (RC) interconnect delay due to shrinking interconnect dimensions has become a serious concern for the development of future-generation electronics. To reduce the delay due to resistance R, a major technology change was the replacement of Aluminum (Al) with Copper (Cu) interconnect layers in the BEoL (Back-end-of-line). Recently, some investigators have suggested using low-k dielectric (having dielectric constant less than 4) instead of SiO2 (k= 3.9) to reduce the capacitive component in the RC delay. Low-k dielectric materials have characteristics such as low mechanical strength, hardness and adhesion, thereby making it imperative to characterize their thermo-mechanical response. Integration of Cu/low-k interconnects has become a critical reliability issue from the foundry's standpoint as well as package reliability. The thermo-mechanical stresses are induced inside the chip during various fabrication processes, field use, etc. The CTE mismatch between the various components leads to significant warpage and stresses in the metal/dielectric region of the die. In this study, a 3-D multi-level finite element (MLFE) approach has been used to examine the mechanical integrity of the Nano-scale inter-layer-dielectric (ILD) when the package is subjected to thermal shock. Since thickness of each layer in the metal/dielectric region is few orders of magnitude lower than that of the chip/substrate (at least 3 orders) it is almost impossible to analyze it at the global level. Therefore, sub-modeling technique has been leveraged to conduct a relatively accurate estimation of the mechanical behavior of the Cu/low-k region under thermal shock condition. A comparative analysis of the mechanical response of the Cu/low-k region is done for 2 cases - 1) ILD taken as linear material (commonly used industry practice to save computational time) 2) temperature dependent non-linearity of the ILD is implemented and creep and plastic response is captured. The creep model was implemented to represent its realistic mechanical behavior. This study demonstrates the variation in the thermo-mechanical response between the 2 cases thereby addressing the importance of a non-linear analysis for such systems. The developed framework is further utilized to perform a parametric analysis for the number of BEoL layers and to study the effect of underfill properties on the structural integrity of the dielectric layers.","PeriodicalId":294924,"journal":{"name":"29th IEEE Semiconductor Thermal Measurement and Management Symposium","volume":"48 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2013-03-17","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"29th IEEE Semiconductor Thermal Measurement and Management Symposium","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/SEMI-THERM.2013.6526817","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

Miniaturization and more recently convergence have been driving the industry since the invention of the transistor and integrated circuit (IC). Though the gate delay has decreased with transistor scaling, the increase in the resistive capacitive (RC) interconnect delay due to shrinking interconnect dimensions has become a serious concern for the development of future-generation electronics. To reduce the delay due to resistance R, a major technology change was the replacement of Aluminum (Al) with Copper (Cu) interconnect layers in the BEoL (Back-end-of-line). Recently, some investigators have suggested using low-k dielectric (having dielectric constant less than 4) instead of SiO2 (k= 3.9) to reduce the capacitive component in the RC delay. Low-k dielectric materials have characteristics such as low mechanical strength, hardness and adhesion, thereby making it imperative to characterize their thermo-mechanical response. Integration of Cu/low-k interconnects has become a critical reliability issue from the foundry's standpoint as well as package reliability. The thermo-mechanical stresses are induced inside the chip during various fabrication processes, field use, etc. The CTE mismatch between the various components leads to significant warpage and stresses in the metal/dielectric region of the die. In this study, a 3-D multi-level finite element (MLFE) approach has been used to examine the mechanical integrity of the Nano-scale inter-layer-dielectric (ILD) when the package is subjected to thermal shock. Since thickness of each layer in the metal/dielectric region is few orders of magnitude lower than that of the chip/substrate (at least 3 orders) it is almost impossible to analyze it at the global level. Therefore, sub-modeling technique has been leveraged to conduct a relatively accurate estimation of the mechanical behavior of the Cu/low-k region under thermal shock condition. A comparative analysis of the mechanical response of the Cu/low-k region is done for 2 cases - 1) ILD taken as linear material (commonly used industry practice to save computational time) 2) temperature dependent non-linearity of the ILD is implemented and creep and plastic response is captured. The creep model was implemented to represent its realistic mechanical behavior. This study demonstrates the variation in the thermo-mechanical response between the 2 cases thereby addressing the importance of a non-linear analysis for such systems. The developed framework is further utilized to perform a parametric analysis for the number of BEoL layers and to study the effect of underfill properties on the structural integrity of the dielectric layers.
热冲击下倒装封装BEoL结构非线性分析的可行性
自晶体管和集成电路(IC)发明以来,小型化和最近的融合一直推动着该行业的发展。尽管栅极延迟随着晶体管的缩放而减小,但由于互连尺寸的缩小而导致的电阻-电容互连延迟的增加已成为下一代电子技术发展的一个严重问题。为了减少由于电阻R造成的延迟,一项主要的技术变革是在BEoL(后端线)中用铜(Cu)互连层取代铝(Al)。最近,一些研究人员建议使用低k介电介质(介电常数小于4)代替SiO2 (k= 3.9)来减少RC延迟中的容性成分。低k介电材料具有机械强度、硬度和附着力低的特点,因此对其热-机械响应进行表征势在必行。从晶圆代工和封装可靠性的角度来看,铜/低钾互连的集成已经成为一个关键的可靠性问题。热机械应力是在各种制造工艺、现场使用等过程中产生的。不同组件之间的CTE不匹配导致模具金属/电介质区域的显著翘曲和应力。在这项研究中,采用三维多层次有限元(MLFE)方法来研究纳米级层间介质(ILD)在封装受到热冲击时的机械完整性。由于金属/介电区的每层厚度比芯片/衬底的厚度低几个数量级(至少3个数量级),因此几乎不可能在全局水平上分析它。因此,利用子建模技术对Cu/low-k区域在热冲击条件下的力学行为进行了相对准确的估计。对Cu/低k区域的力学响应进行了两种情况的对比分析- 1)将ILD作为线性材料(通常用于节省计算时间的工业实践)2)实现ILD的温度相关非线性,并捕获蠕变和塑性响应。采用蠕变模型来表征其真实力学行为。本研究证明了两种情况下热-机械响应的变化,从而解决了非线性分析对这类系统的重要性。所开发的框架进一步用于对BEoL层数进行参数化分析,并研究下填特性对介电层结构完整性的影响。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书