Simulation Investigation of S/Ku dual-band magnetically insulated line Oscillator

2018 IEEE MTT-S International Microwave and RF Conference (IMaRC) Pub Date : 2018-11-01 DOI:10.1109/IMaRC.2018.8877327

Arjun Kumar, Prabhakar Tripathi, S. Dwivedi, P. K. Jain

引用次数: 0

Abstract

A dual-band Magnetically insulated line oscillator (MILO) generating RF in S-band and Ku-band has been presented. The standard device design methodology has been followed for design and validated through simulation. The dispersion diagram for both S-band and Ku -band calculated through EIGEN mode simulation. For the PIC simulation of the device, typically selected beam parameters: diode voltage of 610 kV and diode current of 58 kA, generates the RF of 3.1 GW at frequency 14.1 GHz and RF of 1.2 GW at frequency 2.1 GHz. The overall efficiency of ~12.1 % has been achieved through the device with frequency difference of 8.4 dB.

查看原文本刊更多论文

S/Ku双频磁绝缘线振荡器的仿真研究

介绍了一种产生s波段和ku波段射频的双频磁绝缘线振荡器(MILO)。采用标准的器件设计方法进行设计，并通过仿真验证。通过EIGEN模式模拟计算了s波段和Ku波段的色散图。对于器件的PIC仿真，通常选择波束参数:二极管电压为610 kV，二极管电流为58 kA，在14.1 GHz频率下产生3.1 GW的射频，在2.1 GHz频率下产生1.2 GW的射频。该器件的总效率为12.1%，频率差为8.4 dB。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2018 IEEE MTT-S International Microwave and RF Conference (IMaRC)

自引率

0.00%

发文量