Microwave pipe corrosion detector

11th International Conference 'Microwave and Telecommunication Technology'. Conference Proceedings (IEEE Cat. No.01EX487) Pub Date : 2001-09-10 DOI:10.1109/CRMICO.2001.961707

V.P. Vaskivsky, Y. Kempa, S.I. Koba, R.V. Klymonchuk, O.B. Lyashchyk, N.A. Naumets, Y. Rybak, G.V. Tsukornuk

引用次数: 4

Abstract

The paper presents the results of design, manufacture and research of a microwave detector for detecting the pipe corrosion under an optically opaque coating and protective coating separation. The detector operates in the 5 mm wave band. A minimum diameter of the detected defect is 5-8 mm with an antenna horn aperture diameter of 60 mm. The antenna horn diameter may be changed. The device consists of two blocks: EHF sensor and microprocessor unit with graphic LC-display. Power supply is 220 V, 50 Hz and 8 W.

查看原文本刊更多论文

微波管道腐蚀探测器

本文介绍了一种用于检测不透明涂层和保护涂层分离情况下管道腐蚀的微波探测器的设计、制造和研究结果。探测器工作在5毫米波段。检测到的缺陷最小直径为5mm ~ 8mm，天线喇叭孔径为60mm。天线喇叭直径可以改变。该装置由两个模块组成:EHF传感器和带有图形lc显示的微处理器单元。电源为220v, 50hz, 8w。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

11th International Conference 'Microwave and Telecommunication Technology'. Conference Proceedings (IEEE Cat. No.01EX487)

自引率

0.00%

发文量