Electrical Field Distribution along HVDC GIL Spacer in SF 6 /N 2 Gaseous Mixture

Abstract

Many researchers have proposed a variety of mathematical models to simulate the surface charge accumulation process of DC-GIS/GIL spacers. However, few of them took the gas collision ionization and charge trapping-detrapping process into consideration. This chapter combined the plasma hydrodynamics and charge transport equations and built a modified model. Some conclusions are shown as follows: for the basin-type spacer, the surface charge has the same polarity as the applied voltage on the lower surface but the opposite polarity on the upper surface. For the disc-type spacer, the surface charge has the same polarity as the applied voltage near the shell but the opposite polarity near the conductor under negative voltage. But under positive voltage, negative charge exists almost on the whole surface. The most serious distortion of the electric field occurs at the triple junction of epoxy spacer. Under load condition, there is an obvious temperature rise on the conductor due to joule heating, which has a great influence on the electric field distribution. The application of shielding electrodes has the function of field grading at the triple junction, which can be referred in the DC GIS/GIL design.