Design of a microstrip annular slot antenna for mobile communications

IEEE Antennas and Propagation Society International Symposium 1992 Digest Pub Date : 1992-06-18 DOI:10.1109/APS.1992.221889

P. Mastin, B. Rawat, M. Williamson

引用次数: 10

Abstract

The design analysis and fabrication technique of an omnidirectional microstrip slot antenna for mobile communications are discussed. The antenna was designed at a 2-GHz center frequency, a VSWR (voltage standing wave ratio) of 1.5:1, and a 0.87% bandwidth, and on FR-4 glass epoxy substrate with in /sub r/=4.85, h=0.159 cm. The experimental results are compared with the required design values and the reasons for discrepancy are investigated.<>

查看原文本刊更多论文

移动通信用微带环形槽天线的设计

讨论了移动通信用全向微带槽天线的设计分析和制作技术。天线的中心频率为2ghz，电压驻波比为1.5:1，带宽为0.87%，天线安装在FR-4玻璃环氧基板上，in /sub / r =4.85, h=0.159 cm。将实验结果与设计要求值进行了比较，并分析了产生差异的原因。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

IEEE Antennas and Propagation Society International Symposium 1992 Digest

自引率

0.00%

发文量