Displacement Efficiency in Tight Sandstone Based on Fractional Flow Curve Using Relative Permeability Data

Abstract

In tight gas sandstone, relative permeability is an essential special core analysis dynamic test that can be used to estimate injectivity, secondary recovery, production rate, reservoir simulation, residual gas saturation, and effective water management. Having about 65% of hydraulic fracturing fluid not to flow back and stay in the reservoir results in having the tight sandstone gas reservoir to involve multi-phase flow, namely water and gas. During the hydraulic fracturing job both imbibition and forcibly imbibition processes take place while during fracturing fluid cleanup and gas production drainage flow becomes dominant. The steady state flooding process was used to measure the relative permeability curves for tight sandstone core sample collected from Travis Peak Formation at a depth of 8707 ft. The measurement process involved the performance of a series of steady state experiments with different gas-water injection ratio. The fractional flow curve has been plotted, based on the measured relative permeability, and used to calculate the displacement efficiency for the flow through such type of tight porous media. The measurement showed relatively high irreducible water saturation (31%) and low residual gas saturation (6%). The measured gas relative permeability decreased slowly at a constant rate with increased wetting fluid saturation. The obtained fractional flow curve does not follow the s-shape behavior observed in conventional reservoir. The obtained results showed that displacement efficiency can be enhanced by increasing water viscosity.