{"title":"Schottky barrier diodes based on thermally resistant Ir-GaAs and Pt/Ir-GaAs contacts created by electrochemical deposition","authors":"V. G. Bozhkov, T. P. Bekezina, V. A. Burmistrova","doi":"10.21293/1818-0442-2021-25-1-48-52","DOIUrl":null,"url":null,"abstract":"The article is devoted to the study of the thermal stability of Ir-GaAs and Pt/Ir-GaAs contacts obtained by electrochemical deposition using technology developed by the authors. The choice of metallization is due to a number of reasons, which are discussed in the paper. One of the most important ones is the increased thermal stability of contacts, that enables its use in power devices of semiconductor electronics in wide frequency range. The forward and reverse current – voltage (I – V) characteristics of the contacts in the range of diameters from 500 to 5 μm and their following parameters are studied: ideality factor n, measured and effective barrier heights, reverse voltage. It has been shown that the covering of iridium with a thin layer of Pt increases its thermal stability. A peculiarity of the results is a higher thermal stability of contacts with a small diameter.","PeriodicalId":273068,"journal":{"name":"Proceedings of Tomsk State University of Control Systems and Radioelectronics","volume":"111 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Proceedings of Tomsk State University of Control Systems and Radioelectronics","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.21293/1818-0442-2021-25-1-48-52","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
Abstract
The article is devoted to the study of the thermal stability of Ir-GaAs and Pt/Ir-GaAs contacts obtained by electrochemical deposition using technology developed by the authors. The choice of metallization is due to a number of reasons, which are discussed in the paper. One of the most important ones is the increased thermal stability of contacts, that enables its use in power devices of semiconductor electronics in wide frequency range. The forward and reverse current – voltage (I – V) characteristics of the contacts in the range of diameters from 500 to 5 μm and their following parameters are studied: ideality factor n, measured and effective barrier heights, reverse voltage. It has been shown that the covering of iridium with a thin layer of Pt increases its thermal stability. A peculiarity of the results is a higher thermal stability of contacts with a small diameter.