Comparison of 6-slot/2-pole High-Speed Permanent Magnet Motors with Different Winding Configurations

T. He, Z. Zhu, F. Xu, H. Bin, Di Wu, L. Gong, Jintao T. Chen
{"title":"Comparison of 6-slot/2-pole High-Speed Permanent Magnet Motors with Different Winding Configurations","authors":"T. He, Z. Zhu, F. Xu, H. Bin, Di Wu, L. Gong, Jintao T. Chen","doi":"10.1109/EVER48776.2020.9243015","DOIUrl":null,"url":null,"abstract":"6-slot/2-pole permanent magnet (PM) motors with tooth-coil windings are employed widely for high-speed application due to short end-winding and no inherent magnetic force. However, tooth-coil windings can be replaced by 2 and 3 coil-pitch windings for winding factor improvement. Different winding configurations mainly affect winding factor and end-winding length, and consequently average torque and torque density. In this paper, three 6-slot/2-pole high-speed PM (HSPM) motors with 1, 2, and 3 coil-pitch windings are optimized for maximum average torque by finite element method (FEM). Their electromagnetic performances are then compared, accounting for the influence of motor axial length and end-winding. It is found that for high-speed application, compared with 1 and 3 coil-pitches, 2 coil-pitch has a good trade-off between winding factor and end-winding axial length which are attractive for high efficiency and large torque density.","PeriodicalId":166751,"journal":{"name":"2020 Fifteenth International Conference on Ecological Vehicles and Renewable Energies (EVER)","volume":"270 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2020-09-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"3","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2020 Fifteenth International Conference on Ecological Vehicles and Renewable Energies (EVER)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/EVER48776.2020.9243015","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 3

Abstract

6-slot/2-pole permanent magnet (PM) motors with tooth-coil windings are employed widely for high-speed application due to short end-winding and no inherent magnetic force. However, tooth-coil windings can be replaced by 2 and 3 coil-pitch windings for winding factor improvement. Different winding configurations mainly affect winding factor and end-winding length, and consequently average torque and torque density. In this paper, three 6-slot/2-pole high-speed PM (HSPM) motors with 1, 2, and 3 coil-pitch windings are optimized for maximum average torque by finite element method (FEM). Their electromagnetic performances are then compared, accounting for the influence of motor axial length and end-winding. It is found that for high-speed application, compared with 1 and 3 coil-pitches, 2 coil-pitch has a good trade-off between winding factor and end-winding axial length which are attractive for high efficiency and large torque density.
6槽/2极高速永磁电机不同绕组结构的比较
齿圈式6槽/2极永磁电机因其端部绕组短、无固有磁力而广泛应用于高速应用。但是,齿圈绕组可以用2和3圈距绕组代替,以改善绕组系数。不同绕组形式主要影响绕组系数和端绕组长度,进而影响平均转矩和转矩密度。本文采用有限元法对3台6槽/2极高速永磁(HSPM)电机分别采用1、2和3圈距绕组进行优化,以获得最大平均转矩。考虑电机轴向长度和端部绕组的影响,对其电磁性能进行了比较。研究发现,在高速应用中,与1和3圈距相比,2圈距在绕组系数和端绕组轴向长度之间有较好的权衡,具有较高的效率和较大的转矩密度。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书