Numerical Investigation Into the Effect of Air Swirl on Non-Premixed Combustion

A. B., G. M. Nayak, Y. B., S. B
{"title":"Numerical Investigation Into the Effect of Air Swirl on Non-Premixed Combustion","authors":"A. B., G. M. Nayak, Y. B., S. B","doi":"10.1115/gtindia2021-76016","DOIUrl":null,"url":null,"abstract":"\n Endeavour is made to investigate the effect of swirled air on methane-air combustion in a Harwell combustor geometry. The inlet air swirl intensity on combustion characteristics such as temperature, pollutant formation, and flow dynamics is studied. The modeling of turbulent characteristics is performed with the standard K–ε model using ANSYS Fluent. Eddy dissipation model with one step reaction is used for modeling chemical reaction and P-I radiation model for radiation heat transfer. The swirl number is achieved in the range of 0.0 to 0.6, by varying the tangential velocity to the air inlet. With the increase in swirl intensity, the maximum flame temperature drops, and most of the flame formation shifts towards the inlet of the furnace. The change in the flow field is aided by the formation of recirculating bubbles. The swirl causes the flame to spread radially away from the axis, thereby increasing the heat transfer flux to the furnace wall. As a result, a significant reduction in the formation of NO pollutants is observed.","PeriodicalId":154693,"journal":{"name":"ASME 2021 Gas Turbine India Conference","volume":"16 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2021-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"ASME 2021 Gas Turbine India Conference","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1115/gtindia2021-76016","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

Endeavour is made to investigate the effect of swirled air on methane-air combustion in a Harwell combustor geometry. The inlet air swirl intensity on combustion characteristics such as temperature, pollutant formation, and flow dynamics is studied. The modeling of turbulent characteristics is performed with the standard K–ε model using ANSYS Fluent. Eddy dissipation model with one step reaction is used for modeling chemical reaction and P-I radiation model for radiation heat transfer. The swirl number is achieved in the range of 0.0 to 0.6, by varying the tangential velocity to the air inlet. With the increase in swirl intensity, the maximum flame temperature drops, and most of the flame formation shifts towards the inlet of the furnace. The change in the flow field is aided by the formation of recirculating bubbles. The swirl causes the flame to spread radially away from the axis, thereby increasing the heat transfer flux to the furnace wall. As a result, a significant reduction in the formation of NO pollutants is observed.
空气涡流对非预混燃烧影响的数值研究
努力研究在哈维尔燃烧室几何结构中,旋转空气对甲烷-空气燃烧的影响。研究了进气涡流强度对燃烧特性如温度、污染物形成和流动动力学的影响。采用ANSYS Fluent软件对标准K -ε模型进行了湍流特性建模。化学反应采用一步反应的涡流耗散模型,辐射传热采用P-I辐射模型。通过改变空气入口的切向速度,在0.0到0.6的范围内实现了漩涡数。随着旋流强度的增大,火焰的最高温度下降,火焰的大部分形成向炉膛入口移动。流场的变化是由再循环气泡的形成辅助的。涡流使火焰沿轴向径向扩散,从而增加了炉壁的传热通量。结果,观察到一氧化氮污染物的形成显著减少。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书