Flexible Antenna Design for Wearable Telemedicine Applications

2023 Photonics & Electromagnetics Research Symposium (PIERS) Pub Date : 2023-07-03 DOI:10.1109/PIERS59004.2023.10221503

Sara Yehia Abdel Fatah, Fatma Taher, T. Elwi, M. F. Abo Sree, Mohammad Alibakhshikenart, B. Virdee, P. Livreri, Naser Ojaroudi Patchin, C. See, Giovanni Pau, I. Dayoub, E. Limiti

{"title":"Flexible Antenna Design for Wearable Telemedicine Applications","authors":"Sara Yehia Abdel Fatah, Fatma Taher, T. Elwi, M. F. Abo Sree, Mohammad Alibakhshikenart, B. Virdee, P. Livreri, Naser Ojaroudi Patchin, C. See, Giovanni Pau, I. Dayoub, E. Limiti","doi":"10.1109/PIERS59004.2023.10221503","DOIUrl":null,"url":null,"abstract":"In this article, an antenna design is presented based on three horizontally staggered microstrip lines for wearable telemedicine devices. The antenna is excited through a 50-ohm microstrip line. The proposed antenna was fabricated using conductive copper tape of 35μm thickness and printed on a flexible photo paper suitable for telemedicine applications. The proposed antenna has physical dimensions of 40 × 35 ×0.635 mm3. It was designed to operate at the ISM band 2.45 GHz. The proposed antenna design was simulated and optimized using Computer Simulation Technology of Microwave Studio software (CSTMWS). The design of the antenna was then validated through measurement. The results show good agreement between the simulated and measured results. The proposed antenna's performance is evaluated in terms of radiation efficiency, radiation patterns, and return loss. The results confirm the antenna described here is suitable for wearable wireless electronic devices.","PeriodicalId":354610,"journal":{"name":"2023 Photonics & Electromagnetics Research Symposium (PIERS)","volume":"14 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-07-03","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2023 Photonics & Electromagnetics Research Symposium (PIERS)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/PIERS59004.2023.10221503","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

Abstract

In this article, an antenna design is presented based on three horizontally staggered microstrip lines for wearable telemedicine devices. The antenna is excited through a 50-ohm microstrip line. The proposed antenna was fabricated using conductive copper tape of 35μm thickness and printed on a flexible photo paper suitable for telemedicine applications. The proposed antenna has physical dimensions of 40 × 35 ×0.635 mm3. It was designed to operate at the ISM band 2.45 GHz. The proposed antenna design was simulated and optimized using Computer Simulation Technology of Microwave Studio software (CSTMWS). The design of the antenna was then validated through measurement. The results show good agreement between the simulated and measured results. The proposed antenna's performance is evaluated in terms of radiation efficiency, radiation patterns, and return loss. The results confirm the antenna described here is suitable for wearable wireless electronic devices.

查看原文本刊更多论文

可穿戴远程医疗应用的柔性天线设计

提出了一种基于3条水平交错微带线的可穿戴远程医疗设备天线设计方案。天线通过50欧姆微带线激发。该天线采用35μm厚度的导电铜带制作，并打印在适合远程医疗应用的柔性相纸上。该天线的物理尺寸为40 × 35 ×0.635 mm3。它被设计为在ISM频段2.45 GHz工作。利用微波工作室软件(CSTMWS)的计算机仿真技术对天线设计进行了仿真和优化。然后通过测量验证了天线的设计。仿真结果与实测结果吻合较好。该天线的性能是根据辐射效率、辐射方向图和回波损耗来评估的。结果证实了本文所述天线适用于可穿戴无线电子设备。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2023 Photonics & Electromagnetics Research Symposium (PIERS)

自引率

0.00%

发文量