Printed IFA for WLAN/5G USB Dongle Applications

2019 IEEE Conference on Antenna Measurements & Applications (CAMA) Pub Date : 2019-10-01 DOI:10.1109/CAMA47423.2019.8959593

Pin-Feng Chen, Wen-Zhong Lee, Wen‐Shan Chen, Yung-Chun Lin

引用次数: 0

Abstract

A design of printed IFA (Inverted-F Antenna) for WLAN/5G C-band application is proposed. The antenna is printed on the two sides of the FR4 substrate, and the antenna parts on the two sides are connected by via. The antenna consists of 3-arms on the front and back sides of the substrate. The 3-arms of IFA can resonate some modes to match the required bands for applications. From the results of the antenna, it can be applied to the operating bands covering WLAN 2.4GHz/ 5.2GHz/ 5.8GHz bands and 5G C-Band (3.4–3.6 GHz) applications.

查看原文本刊更多论文

用于WLAN/5G USB加密狗应用的打印IFA

提出了一种用于WLAN/5G c波段应用的印刷反f天线(IFA)设计方案。天线印刷在FR4基板的两侧，两侧的天线部件通过通孔连接。天线由基材的正面和背面的3个臂组成。IFA的三臂可以共振某些模式，以匹配应用所需的频段。从天线的结果来看，它可以应用于覆盖WLAN 2.4GHz/ 5.2GHz/ 5.8GHz频段和5G c频段(3.4-3.6 GHz)应用的工作频段。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2019 IEEE Conference on Antenna Measurements & Applications (CAMA)

自引率

0.00%

发文量