{"title":"Impact of UV-C Assisted Drying Treatment on the Quality of Malaysian Stingless Bee Honey","authors":"Nur Afendi, Nor Nadiah Abdul Karim Shah","doi":"10.36877/aafrj.a0000306","DOIUrl":null,"url":null,"abstract":"Stingless bee honey (SBH) has been the focus of various drying studies with the aim of lowering the moisture content to an acceptable limit of less than 20%. The low moisture level of SBH has been found to slow yeast development and hinder the fermentation process, thereby prolonging its shelf-life. Conventionally, SBH is treated using thermal treatment to lower its moisture content. Due to issues with quality degradation of thermal-treated SBH, other alternatives are being explored. Non-thermal treatment, namely ultraviolet (UV-C) assisted drying, has been proposed in this study with the expectation of replacing conventional heat treatment. The UV-C closed system, when properly employed, will provide enough radiation energy (below 40°C) to evaporate the moisture bound in the honey. Hence, this study was aimed at determining and correlating the effects of the UV-C assisted drying process on the quality of UV-C treated SBH. The experiment was carried out on SBH (Heterotrigona itama) under UV-C treatment with the stated parameters; wavelength: 254 nm, power: 7 W, UV-C dose: 8 mJ/cm2, thickness of SBH: 3 mm for 0, 30, 50, 75, and 120 minutes in a controlled environment (35 ± 5% relative humidity and 25 ± 5 °C temperature). The results of this study showed that the moisture level of SBH was below the critical moisture content of 20%, with the lowest moisture content recorded at 17.42% after 120 minutes of UV-C treatment time (moisture loss: 3.5%) and the highest moisture content of 18.40% after 30 minutes of treatment time (moisture loss: 2.21%). However, the value of 5-HMF obtained in this study was significantly high (above 80 mg/ kg), might be due to the high content of fructose to glucose ratio in SBH. Nevertheless, while it has been demonstrated that UV-C assisted drying was be able to lower the moisture content of SBH, further study is necessary to evaluate its effectiveness without compromising on the quality of SBH.","PeriodicalId":420247,"journal":{"name":"Advances in Agricultural and Food Research Journal","volume":"78 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-07-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Advances in Agricultural and Food Research Journal","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.36877/aafrj.a0000306","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1
Abstract
Stingless bee honey (SBH) has been the focus of various drying studies with the aim of lowering the moisture content to an acceptable limit of less than 20%. The low moisture level of SBH has been found to slow yeast development and hinder the fermentation process, thereby prolonging its shelf-life. Conventionally, SBH is treated using thermal treatment to lower its moisture content. Due to issues with quality degradation of thermal-treated SBH, other alternatives are being explored. Non-thermal treatment, namely ultraviolet (UV-C) assisted drying, has been proposed in this study with the expectation of replacing conventional heat treatment. The UV-C closed system, when properly employed, will provide enough radiation energy (below 40°C) to evaporate the moisture bound in the honey. Hence, this study was aimed at determining and correlating the effects of the UV-C assisted drying process on the quality of UV-C treated SBH. The experiment was carried out on SBH (Heterotrigona itama) under UV-C treatment with the stated parameters; wavelength: 254 nm, power: 7 W, UV-C dose: 8 mJ/cm2, thickness of SBH: 3 mm for 0, 30, 50, 75, and 120 minutes in a controlled environment (35 ± 5% relative humidity and 25 ± 5 °C temperature). The results of this study showed that the moisture level of SBH was below the critical moisture content of 20%, with the lowest moisture content recorded at 17.42% after 120 minutes of UV-C treatment time (moisture loss: 3.5%) and the highest moisture content of 18.40% after 30 minutes of treatment time (moisture loss: 2.21%). However, the value of 5-HMF obtained in this study was significantly high (above 80 mg/ kg), might be due to the high content of fructose to glucose ratio in SBH. Nevertheless, while it has been demonstrated that UV-C assisted drying was be able to lower the moisture content of SBH, further study is necessary to evaluate its effectiveness without compromising on the quality of SBH.