An Approach for Passive Removal of Residual LNAPL from Groundwater

Abstract

Light nonaqueous phase liquids (LNAPLs) are a problematic challenge for obtaining site closure or no further action remediation sites. The source of the LNAPLs varies from leaking underground petroleum storage tanks, to manufacturing facilities where oil leaks create LNAPL accumulations beneath factory floors. Active recovery using pumping or periodic vacuum recovery from wells or sumps is used for remediation, but usually has disappointing results when LNAPL reaccumulates to thicknesses exceeding the 0.01‐foot action level recognized by many states. This paper presents a simple passive approach for recovering persistent LNAPL using nonwoven hydrophobic oil absorbing cloth. The method used laboratory trials to assess physical properties of the cloth. Parameters observed and assessed included sorptive capacity and rate, buoyancy, and LNAPL wicking. It was determined that the cloth could be rolled and secured with cable ties for placement in the wells/sumps. Two placement designs were developed, one where rolled sorbent freely floated on the well/sump fluid surface and a second where the sorbent roll was placed in the fluid column at a fixed depth. Sorbents were then used at two manufacturing facilities where LNAPLs persisted for decades. In both instances, many wells/sumps were reduced to thicknesses below the action level in less than 2 months. In most wells, LNAPL did not reaccumulate. Where it did reaccumulate, it was less than 50% of the original thickness. Using laboratory‐derived recovery rates, cloth sorbents could be sized to minimize placement/recovery frequency while effectively recovering LNAPL.