Development of x-ray backscattering imaging system for detecting contraband concealed in the bottom of vehicle

Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies IV Pub Date : 2020-09-20 DOI:10.1117/12.2571044

Baolu Yang, Xin Wang, Haiping Shen, Jie Xu, Kai Xiong, B. Mu

{"title":"Development of x-ray backscattering imaging system for detecting contraband concealed in the bottom of vehicle","authors":"Baolu Yang, Xin Wang, Haiping Shen, Jie Xu, Kai Xiong, B. Mu","doi":"10.1117/12.2571044","DOIUrl":null,"url":null,"abstract":"Design research of X-ray backscatter imaging system for vehicle security was carried out, aiming at the demand of accurate and rapid detection of contrabands. The influence of the chopper mechanism on the imaging resolution and the solid angle of the flying point beam was simulated, while the parameters and structure of the chopper mechanism were designed. The imaging resolution of the backscattering system is about 8 mm and the solid angle of the flying point beam is about 6.4×10- 5 sr. Based on the X-ray energy deposition and luminescence efficiency, the effect of detector thickness and lead doped on the detection efficiency with different energy was investigated. A calculation model of luminous flux for backscatter detection was established and the influence of detector parameters on scattered X-ray luminous flux was analyzed, also the length of the detector was determined. The results show that it is more reasonable to use the lead-free plastic scintillator with thickness of 50 mm and length of 2.5 m as the backscattering detector for the X-ray backscattering system used for scanning of vehicle bottom, which can meet the demand of security inspection of vehicle bottom.","PeriodicalId":379756,"journal":{"name":"Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies IV","volume":"12 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2020-09-20","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies IV","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1117/12.2571044","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 2

Abstract

Design research of X-ray backscatter imaging system for vehicle security was carried out, aiming at the demand of accurate and rapid detection of contrabands. The influence of the chopper mechanism on the imaging resolution and the solid angle of the flying point beam was simulated, while the parameters and structure of the chopper mechanism were designed. The imaging resolution of the backscattering system is about 8 mm and the solid angle of the flying point beam is about 6.4×10- 5 sr. Based on the X-ray energy deposition and luminescence efficiency, the effect of detector thickness and lead doped on the detection efficiency with different energy was investigated. A calculation model of luminous flux for backscatter detection was established and the influence of detector parameters on scattered X-ray luminous flux was analyzed, also the length of the detector was determined. The results show that it is more reasonable to use the lead-free plastic scintillator with thickness of 50 mm and length of 2.5 m as the backscattering detector for the X-ray backscattering system used for scanning of vehicle bottom, which can meet the demand of security inspection of vehicle bottom.

查看原文本刊更多论文

用于检测车底违禁品的x射线后向散射成像系统的研制

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Counterterrorism, Crime Fighting, Forensics, and Surveillance Technologies IV

自引率

0.00%

发文量