{"title":"Analysis of Dissolved Nitrogen and Oxygen Gases in Palm Fatty Acid Ester Added with Nitrogen Fine Bubbles","authors":"N. Takamura, N. Araoka, M. Fujimura, M. Hanai","doi":"10.1109/ICDL59152.2023.10209346","DOIUrl":null,"url":null,"abstract":"Readily biodegradable electrical insulating oils are attracting attention since they are sustainable, environmentally friendly, and have the potential to replace petroleum-based mineral oils (MO), which have been used for many years in oil-immersed transformers. Particularly, palm fatty acid ester (PFAE) has been actively studied because it has higher relative permittivity ($\\varepsilon_{\\mathrm {{r}}}$), better oxidative stability and better cooling performance than conventional MO. However, since the volume resistivity ($\\rho$) and dielectric dissipation factor (tan $\\delta$) of PFAE are inferior to general MO, authors aim to improve the $\\rho$ and tan $\\delta$ of PFAE without degrading other electrical or chemical property and focused on additive agents. The addition of nanoparticles (NPs) has been studied as one of the methods for improving the properties of MO and synthetic oils. However, it has reported that aggregation of NPs tends to decrease the breakdown voltage of the oils, and that minute NPs has a risk of adversely affecting the human body and the environment. Therefore, authors paid special attention to nitrogen fine bubbles (N2 FBs) as a safe, secure, minute and new material to replace NPs. In recent N2-sealed transformers, the N2 saturation treatment of insulating oil is mainly performed by bubbling of N2 gas. On the other hand, authors had thought that N2 FBs might be able to perform the N2 saturation treatment more efficiently. In this paper, authors analyzed and compared the dissolved N2 and oxygen (O2) gases in PFAE treated by N2 FBs addition or by N2 gas bubbling with different treatment times. As a main result, it was found that N2 FBs addition treatments could dissolve a large amount of N2 gas into PFAE in a short time of 1/60 or less compared to N2 gas bubbling treatments.","PeriodicalId":307579,"journal":{"name":"2023 IEEE 22nd International Conference on Dielectric Liquids (ICDL)","volume":"17 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2023-06-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2023 IEEE 22nd International Conference on Dielectric Liquids (ICDL)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICDL59152.2023.10209346","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
Abstract
Readily biodegradable electrical insulating oils are attracting attention since they are sustainable, environmentally friendly, and have the potential to replace petroleum-based mineral oils (MO), which have been used for many years in oil-immersed transformers. Particularly, palm fatty acid ester (PFAE) has been actively studied because it has higher relative permittivity ($\varepsilon_{\mathrm {{r}}}$), better oxidative stability and better cooling performance than conventional MO. However, since the volume resistivity ($\rho$) and dielectric dissipation factor (tan $\delta$) of PFAE are inferior to general MO, authors aim to improve the $\rho$ and tan $\delta$ of PFAE without degrading other electrical or chemical property and focused on additive agents. The addition of nanoparticles (NPs) has been studied as one of the methods for improving the properties of MO and synthetic oils. However, it has reported that aggregation of NPs tends to decrease the breakdown voltage of the oils, and that minute NPs has a risk of adversely affecting the human body and the environment. Therefore, authors paid special attention to nitrogen fine bubbles (N2 FBs) as a safe, secure, minute and new material to replace NPs. In recent N2-sealed transformers, the N2 saturation treatment of insulating oil is mainly performed by bubbling of N2 gas. On the other hand, authors had thought that N2 FBs might be able to perform the N2 saturation treatment more efficiently. In this paper, authors analyzed and compared the dissolved N2 and oxygen (O2) gases in PFAE treated by N2 FBs addition or by N2 gas bubbling with different treatment times. As a main result, it was found that N2 FBs addition treatments could dissolve a large amount of N2 gas into PFAE in a short time of 1/60 or less compared to N2 gas bubbling treatments.