Communication of system based on CAN for acoustic emission diagnostic

Yong-Jae Eum, Min-Cheol Lee
{"title":"Communication of system based on CAN for acoustic emission diagnostic","authors":"Yong-Jae Eum, Min-Cheol Lee","doi":"10.1109/ICCAS.2008.4694389","DOIUrl":null,"url":null,"abstract":"This research is carried out on protocol design of CAN for the acoustic emission diagnostic system (AEDS). We have been developing the AEDS which is used to examine whether the state of equipments is good or bad. The system must need unification through communication method because it consists of a monitoring unit and some diagnostic units. A monitoring unit is able to simultaneously control diagnostic units and to conveniently monitor all diagnostic units in a short time. All diagnostic units should handle diagnostic results of the inspection data that is measured by the acoustic emission sensor. Accordingly the system needs both a quite rapid response speed and unparalleled reliability and safety. The CAN is used in broad range of industry field as communication method and is applied to diverse application systems. The CAN is satisfied with these requirements at the AEDS. The CAN has enough response speed and high reliability and safety. Consequently, we have applied the CAN to the AEDS. The system has been improved an efficient protocol design of CAN.","PeriodicalId":341946,"journal":{"name":"2008 International Conference on Control, Automation and Systems","volume":"74 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2008-12-02","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2008 International Conference on Control, Automation and Systems","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ICCAS.2008.4694389","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 1

Abstract

This research is carried out on protocol design of CAN for the acoustic emission diagnostic system (AEDS). We have been developing the AEDS which is used to examine whether the state of equipments is good or bad. The system must need unification through communication method because it consists of a monitoring unit and some diagnostic units. A monitoring unit is able to simultaneously control diagnostic units and to conveniently monitor all diagnostic units in a short time. All diagnostic units should handle diagnostic results of the inspection data that is measured by the acoustic emission sensor. Accordingly the system needs both a quite rapid response speed and unparalleled reliability and safety. The CAN is used in broad range of industry field as communication method and is applied to diverse application systems. The CAN is satisfied with these requirements at the AEDS. The CAN has enough response speed and high reliability and safety. Consequently, we have applied the CAN to the AEDS. The system has been improved an efficient protocol design of CAN.
基于CAN的声发射诊断系统通信
本文对声发射诊断系统(AEDS)的CAN协议设计进行了研究。我们一直在开发用于检测设备状态好坏的AEDS。该系统由一个监测单元和一些诊断单元组成,必须通过通信方式进行统一。监控单元能够同时控制诊断单元,方便在短时间内对所有诊断单元进行监控。各诊断单位应对声发射传感器测量的检测数据的诊断结果进行处理。因此,系统既需要相当快的响应速度,又需要无与伦比的可靠性和安全性。CAN作为通信方式广泛应用于工业领域,应用于各种应用系统。CAN在aed上满足这些要求。CAN具有足够的响应速度和较高的可靠性和安全性。因此,我们将CAN应用于aed。对系统进行了改进,实现了高效的CAN协议设计。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书