Five-phase permanent magnet synchronous machine operating as generator design, parameter determination by FEM and performance

Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344) Pub Date : 2002-12-10 DOI:10.1109/IAS.2002.1044118

L. Pereira, V. Canalli

{"title":"Five-phase permanent magnet synchronous machine operating as generator design, parameter determination by FEM and performance","authors":"L. Pereira, V. Canalli","doi":"10.1109/IAS.2002.1044118","DOIUrl":null,"url":null,"abstract":"The paper describes the design and parameter calculation of a five-phase permanent magnet synchronous machine intended for operation as generator connected to the load over a rectifier bridge. The main parameters and machine dimensions are determined using the finite element method in 2 dimensions. Calculated no-load induced voltage and inductances are compared with measured values obtained from a prototype machine. A circuit based mathematical model is also developed and simulated using Matlab/Simulink and the results are used to determine the machine performance as generator. The simulation results are checked versus measured values, and a good agreement between the simulation and measurements was observed. The implemented model gives results with sufficient accuracy, allowing to determine the machine behavior in early design stages. The method described here can be successfully applied for designing and performance calculation of high phase machine.","PeriodicalId":202482,"journal":{"name":"Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)","volume":"101 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2002-12-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"13","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/IAS.2002.1044118","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 13

Abstract

The paper describes the design and parameter calculation of a five-phase permanent magnet synchronous machine intended for operation as generator connected to the load over a rectifier bridge. The main parameters and machine dimensions are determined using the finite element method in 2 dimensions. Calculated no-load induced voltage and inductances are compared with measured values obtained from a prototype machine. A circuit based mathematical model is also developed and simulated using Matlab/Simulink and the results are used to determine the machine performance as generator. The simulation results are checked versus measured values, and a good agreement between the simulation and measurements was observed. The implemented model gives results with sufficient accuracy, allowing to determine the machine behavior in early design stages. The method described here can be successfully applied for designing and performance calculation of high phase machine.

查看原文本刊更多论文

作为发电机运行的五相永磁同步电机的设计、参数的有限元确定及性能分析

本文介绍了一种作为发电机通过整流桥与负载连接的五相永磁同步电机的设计和参数计算。采用二维有限元法确定了主要参数和机床尺寸。计算的空载感应电压和电感与样机的测量值进行了比较。建立了基于电路的数学模型，并用Matlab/Simulink进行了仿真，并利用仿真结果确定了电机作为发电机的性能。仿真结果与实测值进行了对比，仿真结果与实测值吻合较好。实现的模型给出的结果具有足够的精度，允许在早期设计阶段确定机器的行为。该方法可成功地应用于高相电机的设计和性能计算。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344)

自引率

0.00%

发文量