{"title":"PERANCANGAN KONTROL DETEKSI DINI KEREGANGAN BELT ELEVATOR SEBAGAI SAFETY OVERFLOW MATERIAL SERBUK BIJI BERBASIS PROGRAMMABLE LOGIC CONTROLLER","authors":"Tatok Dwi Jatmiko, Fachrudin Hunaini, Anis Qustoniah","doi":"10.31328/jwt.v26i2.797","DOIUrl":null,"url":null,"abstract":"Elevator is a material vertical distribution tool in the industry. In a vertical material distribution system many problems arise, especially in elevator belts. The problem that arises is the use of an old elevator belt that has the potential to experience tension. With this condition, it is necessary to make an automatic control system for detecting the tension of elevator belts based on changes in the rotation of drum elevators. When belt tension disturbances occur, PLC-based elevator belt early detection system can immediately turn off the entire system based on changes in the drum rotation value of the elevator. By using the gear ratio system on each drive motor, chain conveyor rotation 1 ± 47rpm with a current value of 0.13A, then the elevator unit with ± 98rpm rotation with a current value of 0.13A, and finally the chain conveyor 2 turns to ± 255rpm with a current value of 0.12A then rotation in each unit will be of different value so as to minimize the potential for material buildup in each transfer unit distribution.","PeriodicalId":348067,"journal":{"name":"Widya Teknika","volume":"66 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2018-10-30","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"Widya Teknika","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.31328/jwt.v26i2.797","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0
Abstract
Elevator is a material vertical distribution tool in the industry. In a vertical material distribution system many problems arise, especially in elevator belts. The problem that arises is the use of an old elevator belt that has the potential to experience tension. With this condition, it is necessary to make an automatic control system for detecting the tension of elevator belts based on changes in the rotation of drum elevators. When belt tension disturbances occur, PLC-based elevator belt early detection system can immediately turn off the entire system based on changes in the drum rotation value of the elevator. By using the gear ratio system on each drive motor, chain conveyor rotation 1 ± 47rpm with a current value of 0.13A, then the elevator unit with ± 98rpm rotation with a current value of 0.13A, and finally the chain conveyor 2 turns to ± 255rpm with a current value of 0.12A then rotation in each unit will be of different value so as to minimize the potential for material buildup in each transfer unit distribution.