Low Complexity Linear Detectors for Massive MIMO with Several Antenna Array Configurations: A Comparative Study

Mohammed Elhefnawy, M. Albreem
{"title":"Low Complexity Linear Detectors for Massive MIMO with Several Antenna Array Configurations: A Comparative Study","authors":"Mohammed Elhefnawy, M. Albreem","doi":"10.18178/ijeetc.11.6.410-418","DOIUrl":null,"url":null,"abstract":"In Multiple-Input Multiple-Output (MIMO), there is multi-user interference because of the limited number of antennas at the Base Station (BS). Deploying more antenna elements at the BS to decrease the multi-user interference is a costly solution. Therefore, changing the configuration of antenna arrays at the BS is implemented as an alternative. In this paper, the impact of BS antenna array configurations on the performance of massive MIMO detection techniques is investigated where four different antenna array configurations are implemented at the BS: Uniform Linear Array (ULA), Uniform Rectangular Planar Array (URPA), Uniform Circular Array (UCA) and Uniform Circular Planar Array (UCPA). The performance of the massive MIMO system is based on the millimeter wave (mmWave) channel that depends on the array response vector of the BS antenna array configuration. To the best of our knowledge, this is the first paper to investigate the impact of antenna array configurations at the BS on the performance and the computational complexity of massive MIMO detection techniques. Numerical results show that the implementation of URPA at the BS with MMSE detection algorithm can achieve the best performance of BER=10−4 at SNR = 9dB. The deployment of the UCA at the BS with the successive over-relaxation (SOR), the Gauss-Seidel (GS), and the conjugate-gradient (CG) detection methods provides a performance of BER=10−4 at SNR = 12dB when the number of iterations equals eight. In the case of using the UCA at BS with the Richardson (RI) detection method, the number of iterations is required to be increased to achieve the same performance. To achieve BER=10−4, the detector based on the CG method has the lowest computational complexity while the RI method has the highest complexity.","PeriodicalId":154853,"journal":{"name":"International Journal of Electrical and Electronic Engineering & Telecommunications.","volume":"64 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"1900-01-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"International Journal of Electrical and Electronic Engineering & Telecommunications.","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.18178/ijeetc.11.6.410-418","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

In Multiple-Input Multiple-Output (MIMO), there is multi-user interference because of the limited number of antennas at the Base Station (BS). Deploying more antenna elements at the BS to decrease the multi-user interference is a costly solution. Therefore, changing the configuration of antenna arrays at the BS is implemented as an alternative. In this paper, the impact of BS antenna array configurations on the performance of massive MIMO detection techniques is investigated where four different antenna array configurations are implemented at the BS: Uniform Linear Array (ULA), Uniform Rectangular Planar Array (URPA), Uniform Circular Array (UCA) and Uniform Circular Planar Array (UCPA). The performance of the massive MIMO system is based on the millimeter wave (mmWave) channel that depends on the array response vector of the BS antenna array configuration. To the best of our knowledge, this is the first paper to investigate the impact of antenna array configurations at the BS on the performance and the computational complexity of massive MIMO detection techniques. Numerical results show that the implementation of URPA at the BS with MMSE detection algorithm can achieve the best performance of BER=10−4 at SNR = 9dB. The deployment of the UCA at the BS with the successive over-relaxation (SOR), the Gauss-Seidel (GS), and the conjugate-gradient (CG) detection methods provides a performance of BER=10−4 at SNR = 12dB when the number of iterations equals eight. In the case of using the UCA at BS with the Richardson (RI) detection method, the number of iterations is required to be increased to achieve the same performance. To achieve BER=10−4, the detector based on the CG method has the lowest computational complexity while the RI method has the highest complexity.
具有多种天线阵列配置的大规模MIMO低复杂度线性探测器:比较研究
在多输入多输出(MIMO)中,由于基站(BS)天线数量有限,存在多用户干扰。在BS部署更多的天线单元以减少多用户干扰是一种昂贵的解决方案。因此,改变BS天线阵列的配置是一种替代方案。本文研究了BS天线阵列配置对大规模MIMO探测技术性能的影响,在BS上实现了四种不同的天线阵列配置:均匀线性阵列(ULA)、均匀矩形平面阵列(URPA)、均匀圆形阵列(UCA)和均匀圆形平面阵列(UCPA)。大规模MIMO系统的性能基于毫米波(mmWave)信道,而毫米波信道依赖于BS天线阵列配置的阵列响应向量。据我们所知,这是第一篇研究BS天线阵列配置对大规模MIMO检测技术性能和计算复杂度影响的论文。数值结果表明,在信噪比为9dB时,采用MMSE检测算法实现URPA可获得BER=10−4的最佳性能。采用连续过松弛(SOR)、高斯-塞德尔(GS)和共轭梯度(CG)检测方法部署UCA,当迭代次数为8次时,在信噪比为12dB时,其性能为BER=10−4。在使用理查德森(RI)检测方法的情况下,需要增加迭代次数才能达到相同的性能。为了达到BER=10−4,基于CG方法的检测器的计算复杂度最低,而基于RI方法的检测器的计算复杂度最高。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书