Novel Transmission Mechanism (Shaft-following Gear Mechanism) Applied to a Puncture Robot for Three Dimensional Punctures

Takuma Ogawa, R. Saito, H. Iwata
{"title":"Novel Transmission Mechanism (Shaft-following Gear Mechanism) Applied to a Puncture Robot for Three Dimensional Punctures","authors":"Takuma Ogawa, R. Saito, H. Iwata","doi":"10.1109/ISMCR56534.2022.9950573","DOIUrl":null,"url":null,"abstract":"Computed Tomography (CT)-guided intervention requires an expertized skill to physicians and a numerous of robot-assisted needle insertion system has been developed. As a challenging issue developing the CT-guided needle insertion robot system, the inside of a CT gantry is a special environment where there is no room for movement and no metal can be inserted because of causing an artifact on the acquired image. The gantry entry portion of the robot therefore requires miniaturization and non-metallization. The most difficult part of the non-metallization of a robot is the motor element. While many of the robot's structural materials can be made non-metallic thanks to advances in plastic materials, the actuator cannot be made non-metallic. In some cases, the actuator can be attached directly to the moving part, but this limits the angle of motion of the robot to where the actuator is outside the imaging range. In this report, we introduce a unique mechanism that enables the needle manipulation with a miniaturized configuration inside the CT gantry. The mechanism satisfies the requirements of power transmission between axes whose relative positions are indeterminate, miniaturization to prevent interference with robot motion, and non-metallization. This mechanism combines a single-node link and gears to transmit rotational power while passively responding to changes in the positional relationship between axes. The hinge fixation of the basic single-node link is aligned with the axis of rotation of the first gear, and the subsequent gears can be freely arranged to mesh with each other. The minimum configuration is 3 gears, one at the hinge, and two at each end. Theoretically, the number of gears can be increased, but it is desirable to use as few gears as possible because transmission accuracy will decrease due to backlash and other factors. The movement of the mechanism does not necessarily affect the state of the gears at all. If the absolute angle of the linkage changes, the positional relationship between adjacent gears changes while the distance between the axes remains constant. If the positional relationship of the meshing gears changes, the gear will rotate. If rotation is simply transmitted, this angular change does not affect the operation of the machine, but if rotation is transmitted for the purpose of angle determination, the angle input side must be adjusted. This depends on the changing tip position coordinates. Therefore, we developed an algorithm that outputs adjustment parameters upon input of information on the mechanism to be used. The algorithm derives an approximate equation from numerical analyses that limits the error from backlash. We applied this mechanism to our robot with a 25G needle and inserted the needle into the target from various angles. The accuracy was 2.5 mm, which satisfied our requirements.","PeriodicalId":359153,"journal":{"name":"2022 International Symposium on Measurement and Control in Robotics (ISMCR)","volume":"112 1","pages":"0"},"PeriodicalIF":0.0000,"publicationDate":"2022-09-28","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":null,"platform":"Semanticscholar","paperid":null,"PeriodicalName":"2022 International Symposium on Measurement and Control in Robotics (ISMCR)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/ISMCR56534.2022.9950573","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 0

Abstract

Computed Tomography (CT)-guided intervention requires an expertized skill to physicians and a numerous of robot-assisted needle insertion system has been developed. As a challenging issue developing the CT-guided needle insertion robot system, the inside of a CT gantry is a special environment where there is no room for movement and no metal can be inserted because of causing an artifact on the acquired image. The gantry entry portion of the robot therefore requires miniaturization and non-metallization. The most difficult part of the non-metallization of a robot is the motor element. While many of the robot's structural materials can be made non-metallic thanks to advances in plastic materials, the actuator cannot be made non-metallic. In some cases, the actuator can be attached directly to the moving part, but this limits the angle of motion of the robot to where the actuator is outside the imaging range. In this report, we introduce a unique mechanism that enables the needle manipulation with a miniaturized configuration inside the CT gantry. The mechanism satisfies the requirements of power transmission between axes whose relative positions are indeterminate, miniaturization to prevent interference with robot motion, and non-metallization. This mechanism combines a single-node link and gears to transmit rotational power while passively responding to changes in the positional relationship between axes. The hinge fixation of the basic single-node link is aligned with the axis of rotation of the first gear, and the subsequent gears can be freely arranged to mesh with each other. The minimum configuration is 3 gears, one at the hinge, and two at each end. Theoretically, the number of gears can be increased, but it is desirable to use as few gears as possible because transmission accuracy will decrease due to backlash and other factors. The movement of the mechanism does not necessarily affect the state of the gears at all. If the absolute angle of the linkage changes, the positional relationship between adjacent gears changes while the distance between the axes remains constant. If the positional relationship of the meshing gears changes, the gear will rotate. If rotation is simply transmitted, this angular change does not affect the operation of the machine, but if rotation is transmitted for the purpose of angle determination, the angle input side must be adjusted. This depends on the changing tip position coordinates. Therefore, we developed an algorithm that outputs adjustment parameters upon input of information on the mechanism to be used. The algorithm derives an approximate equation from numerical analyses that limits the error from backlash. We applied this mechanism to our robot with a 25G needle and inserted the needle into the target from various angles. The accuracy was 2.5 mm, which satisfied our requirements.
应用于三维穿刺机器人的新型传动机构(轴跟随齿轮机构)
计算机断层扫描(CT)引导的干预需要医生的专业技能,并且已经开发了许多机器人辅助针头插入系统。CT导针机器人系统的开发是一个具有挑战性的问题,CT龙门内部是一个特殊的环境,没有运动空间,也不能插入金属,因为会对获取的图像产生伪影。因此,机器人的龙门入口部分要求小型化和非金属化。机器人的非金属化最困难的部分是电机元件。虽然由于塑料材料的进步,机器人的许多结构材料可以制成非金属,但执行器不能制成非金属。在某些情况下,执行器可以直接连接到运动部件上,但这限制了机器人的运动角度,使执行器超出成像范围。在本报告中,我们介绍了一种独特的机制,使针操作与CT龙门内的小型化配置。该机构满足相对位置不确定的轴间动力传递、防止干扰机器人运动的小型化和非金属化的要求。该机构结合单节点连杆和齿轮传递旋转动力,同时被动响应轴与轴之间位置关系的变化。基本单节点连杆的铰链固定与第一个齿轮的旋转轴对齐,后续齿轮可自由布置相互啮合。最小配置是3个齿轮,一个在铰链上,两个在两端。从理论上讲,齿轮的数量可以增加,但它是可取的使用尽可能少的齿轮,因为传动精度将下降,由于反弹和其他因素。机构的运动并不一定影响齿轮的状态。如果连杆的绝对角度发生变化,则相邻齿轮之间的位置关系发生变化,而轴线之间的距离保持不变。如果啮合齿轮的位置关系发生变化,则齿轮将旋转。如果单纯传递旋转,这种角度变化并不影响机器的运行,但如果以确定角度为目的传递旋转,则必须调整角度输入侧。这取决于尖端位置坐标的变化。因此,我们开发了一种算法,根据要使用的机构的信息输入输出调整参数。该算法从数值分析中导出了一个近似方程,限制了间隙误差。我们将这种机构应用到我们的机器人上,用25G的针,从不同的角度将针插入目标。精度为2.5 mm,满足我们的要求。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
求助全文
约1分钟内获得全文 求助全文
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:604180095
Book学术官方微信
小红书