Preliminary experiment research on the W-band gyrotron traveling wave tube

2015 IEEE International Vacuum Electronics Conference (IVEC) Pub Date : 2015-04-27 DOI:10.1109/IVEC.2015.7224033

E. Wang, An Li, Xu Zeng, Hao Sun, S. Zhu, Jinjun Feng

引用次数: 11

Abstract

In the experimental study a periodic dielectric loaded structure is used as the high-frequency structure of the W-band Gyro-TWT. The experimental measurement is carried out when the accelerating voltage is 63kV and the electron beam current is 6A. A peak output power of 120 kW, 3dB bandwidth of 6 GHz are obtained.

查看原文本刊更多论文

w波段回旋管行波管的初步实验研究

在实验研究中，采用周期性介质加载结构作为w波段陀螺行波管的高频结构。实验测量是在加速电压为63kV，电子束电流为6A时进行的。峰值输出功率为120kw, 3dB带宽为6ghz。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

求助全文

约1分钟内获得全文求助全文

来源期刊

2015 IEEE International Vacuum Electronics Conference (IVEC)

自引率

0.00%

发文量