Predicting the Large Deflection Path of End-Loaded Tapered Cantilever Beams

Abstract

A simple (quadratic) mathematical model for predicting the deflection path of both non-tapered and continuously tapered cantilever beams loaded with a vertical end force is presented. It is based on the proposition that the path is a function of the ratio of the endpoints’ moments of inertia. The model is valid for both small and large (the tip makes a 70 degree angle with the horizontal) deflections. This was verified through physical testing, comparison to solution of the Bernoulli-Euler equation, and results obtained through nonlinear finite element analysis. Predicted endpoint deflections were found to be accurate within 1.8% of the actual deflection path for moment of inertia ratios varying from 1:1 to 1000:1.