3D打印锚杆加固分离节理花岗岩破坏机理

IF 1.5 4区工程技术 Q3 ENGINEERING, GEOLOGICAL

Geotechnique Letters Pub Date : 2021-07-26 DOI:10.1680/JGELE.21.00065

Xiaowei Feng, Fei Xue, L. Xiaoxia, M. Wang

引用次数: 2

摘要

本技术笔记采用螺栓加固节理花岗岩，探讨节理角度与螺栓加固效果之间的关系。3d打印(3DP)螺栓是用…

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Failure Mechanism of Joint-separated Granite Reinforced by 3D printed bolt

This technical note uses bolt-reinforced jointed granite to investigate the relationship between the joint angle and the reinforcing effects of bolt. 3D-printed (3DP) bolts were manufactured with a...

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Geotechnique Letters ENGINEERING, GEOLOGICAL-

CiteScore

4.20

自引率

0.00%

发文量

期刊介绍： Géotechnique Letters provides a vehicle for the rapid international dissemination of the latest and most innovative geotechnical research and practice. As an online journal, it is aimed at publishing short papers, intending to foster the quick exchange of the latest advances and most current ideas without the delays imposed by printed journals, whilst still maintaining rigorous peer reviewing standards.