腰果酚对杨木和杨木体积性能的硬化和稳定作用

IF 0.2 Q4 FORESTRY
V. Shamaev, O. Shishlov
{"title":"腰果酚对杨木和杨木体积性能的硬化和稳定作用","authors":"V. Shamaev, O. Shishlov","doi":"10.37482/0536-1036-2023-3-155-161","DOIUrl":null,"url":null,"abstract":"Aspen and poplar are the least required types of wood in the Russian Federation, whose stock is continually expanding. Such wood can be used as a substitute for valuable hardwood, but in this case the strength must be almost doubled while achieving stability in shape and size. Treatment with acetic anhydride, polyvinyl alcohol, polyethylene glycol, or hydrothermal care are the most common methods for maintaining the volumetric stability of the wood. Treatment with phenol- and urea-formaldehyde monomers, oligomers, and resins is typically done for strength improvement. The stabilization of the dimensional parameters is especially critical for pressed wood, which has 8 times greater swelling in water than raw wood. Cardanol was chosen as a modifier. It can be derived from cashew nutshell liquid or synthesized. The established technique for impregnating wood with cardanol includes 2–3 % acetic acid, followed by heat treatment at 140–150 °С for 6–8 hours. During this process, cardanol polymerizes with components of the lignocarbohydrate complex of the wood, which does not only improve its characteristics but also provides form and size stability in an environment with changeable humidity. A Mettler Toledo DSC 823e/700 differential scanning calorimeter was used to examine the kinetics. Heat fluxes were measured in 30 µl sealed steel crucibles that could sustain steam pressure up to 15 MPa. At a heating rate of 10 °C/min, the heat flow curve showed an exothermic peak with a maximum temperature of 150.7 °C. Aspen wood with 15 % cardanol content has a compressive strength along the fibers of 69 MPa, a volume swelling limit of 2.6 %, and a moisture absorption limit of 18 %. The ultimate water absorption and ultimate volumetric swelling of wood impregnated with cardanol are comparable to the relevant indications of the modified wood brands Accoja, Belmadur, and Thermowood. For citation: Shamaev V.A., Shishlov O.F. Hardening and Stabilization of Volumetric Properties in Aspen and Poplar Wood with Cardanol. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 3, pp. 155–161. (In Russ.). https://doi.org/10.37482/0536-1036-2023-3-155-161","PeriodicalId":44136,"journal":{"name":"Lesnoy Zhurnal-Forestry Journal","volume":"1 1","pages":""},"PeriodicalIF":0.2000,"publicationDate":"2023-06-10","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Hardening and Stabilization of Volumetric Properties in Aspen and Poplar Wood with Cardanol\",\"authors\":\"V. Shamaev, O. Shishlov\",\"doi\":\"10.37482/0536-1036-2023-3-155-161\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"Aspen and poplar are the least required types of wood in the Russian Federation, whose stock is continually expanding. Such wood can be used as a substitute for valuable hardwood, but in this case the strength must be almost doubled while achieving stability in shape and size. Treatment with acetic anhydride, polyvinyl alcohol, polyethylene glycol, or hydrothermal care are the most common methods for maintaining the volumetric stability of the wood. Treatment with phenol- and urea-formaldehyde monomers, oligomers, and resins is typically done for strength improvement. The stabilization of the dimensional parameters is especially critical for pressed wood, which has 8 times greater swelling in water than raw wood. Cardanol was chosen as a modifier. It can be derived from cashew nutshell liquid or synthesized. The established technique for impregnating wood with cardanol includes 2–3 % acetic acid, followed by heat treatment at 140–150 °С for 6–8 hours. During this process, cardanol polymerizes with components of the lignocarbohydrate complex of the wood, which does not only improve its characteristics but also provides form and size stability in an environment with changeable humidity. A Mettler Toledo DSC 823e/700 differential scanning calorimeter was used to examine the kinetics. Heat fluxes were measured in 30 µl sealed steel crucibles that could sustain steam pressure up to 15 MPa. At a heating rate of 10 °C/min, the heat flow curve showed an exothermic peak with a maximum temperature of 150.7 °C. Aspen wood with 15 % cardanol content has a compressive strength along the fibers of 69 MPa, a volume swelling limit of 2.6 %, and a moisture absorption limit of 18 %. The ultimate water absorption and ultimate volumetric swelling of wood impregnated with cardanol are comparable to the relevant indications of the modified wood brands Accoja, Belmadur, and Thermowood. For citation: Shamaev V.A., Shishlov O.F. Hardening and Stabilization of Volumetric Properties in Aspen and Poplar Wood with Cardanol. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 3, pp. 155–161. (In Russ.). https://doi.org/10.37482/0536-1036-2023-3-155-161\",\"PeriodicalId\":44136,\"journal\":{\"name\":\"Lesnoy Zhurnal-Forestry Journal\",\"volume\":\"1 1\",\"pages\":\"\"},\"PeriodicalIF\":0.2000,\"publicationDate\":\"2023-06-10\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Lesnoy Zhurnal-Forestry Journal\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.37482/0536-1036-2023-3-155-161\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q4\",\"JCRName\":\"FORESTRY\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Lesnoy Zhurnal-Forestry Journal","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.37482/0536-1036-2023-3-155-161","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q4","JCRName":"FORESTRY","Score":null,"Total":0}
引用次数: 0

摘要

白杨和白杨是俄罗斯联邦最不需要的木材类型,其储量正在不断扩大。这种木材可以作为贵重硬木的替代品,但在这种情况下,强度必须几乎翻倍,同时保持形状和尺寸的稳定。用乙酸酐、聚乙烯醇、聚乙二醇或水热处理是保持木材体积稳定性的最常用方法。用苯酚和脲醛单体、低聚物和树脂处理通常是为了提高强度。尺寸参数的稳定对压制木材尤其重要,因为压制木材在水中的膨胀比原始木材大8倍。选择腰果酚作为改性剂。它可以从腰果液中提取,也可以人工合成。用腰果酚浸渍木材的既定技术包括2 - 3%的乙酸,然后在140-150°С下加热6-8小时。在这个过程中,腰果酚与木材的木质碳水化合物复合物的组分聚合,这不仅改善了其特性,而且在湿度变化的环境中提供了形状和尺寸的稳定性。采用Mettler Toledo DSC 823e/700差示扫描量热仪对反应动力学进行了研究。热通量在30µl密封钢坩埚中测量,坩埚可以承受高达15 MPa的蒸汽压力。在升温速率为10℃/min时,热流曲线出现放热峰,最高温度为150.7℃。腰果酚含量为15%的杨木沿纤维抗压强度为69 MPa,体积膨胀极限为2.6%,吸湿极限为18%。用腰果酚浸渍的木材的最终吸水率和最终体积膨胀率与改性木材品牌Accoja、Belmadur和Thermowood的相关指标相当。引用本文:Shamaev v.a., Shishlov O.F.。腰果酚对杨木和杨木体积性能的硬化和稳定作用。俄罗斯林业杂志,2023年第1期。3,第155-161页。(俄国人)。https://doi.org/10.37482/0536-1036-2023-3-155-161
本文章由计算机程序翻译,如有差异,请以英文原文为准。
Hardening and Stabilization of Volumetric Properties in Aspen and Poplar Wood with Cardanol
Aspen and poplar are the least required types of wood in the Russian Federation, whose stock is continually expanding. Such wood can be used as a substitute for valuable hardwood, but in this case the strength must be almost doubled while achieving stability in shape and size. Treatment with acetic anhydride, polyvinyl alcohol, polyethylene glycol, or hydrothermal care are the most common methods for maintaining the volumetric stability of the wood. Treatment with phenol- and urea-formaldehyde monomers, oligomers, and resins is typically done for strength improvement. The stabilization of the dimensional parameters is especially critical for pressed wood, which has 8 times greater swelling in water than raw wood. Cardanol was chosen as a modifier. It can be derived from cashew nutshell liquid or synthesized. The established technique for impregnating wood with cardanol includes 2–3 % acetic acid, followed by heat treatment at 140–150 °С for 6–8 hours. During this process, cardanol polymerizes with components of the lignocarbohydrate complex of the wood, which does not only improve its characteristics but also provides form and size stability in an environment with changeable humidity. A Mettler Toledo DSC 823e/700 differential scanning calorimeter was used to examine the kinetics. Heat fluxes were measured in 30 µl sealed steel crucibles that could sustain steam pressure up to 15 MPa. At a heating rate of 10 °C/min, the heat flow curve showed an exothermic peak with a maximum temperature of 150.7 °C. Aspen wood with 15 % cardanol content has a compressive strength along the fibers of 69 MPa, a volume swelling limit of 2.6 %, and a moisture absorption limit of 18 %. The ultimate water absorption and ultimate volumetric swelling of wood impregnated with cardanol are comparable to the relevant indications of the modified wood brands Accoja, Belmadur, and Thermowood. For citation: Shamaev V.A., Shishlov O.F. Hardening and Stabilization of Volumetric Properties in Aspen and Poplar Wood with Cardanol. Lesnoy Zhurnal = Russian Forestry Journal, 2023, no. 3, pp. 155–161. (In Russ.). https://doi.org/10.37482/0536-1036-2023-3-155-161
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
50.00%
发文量
80
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信