OBTAINING SOME THERMOD AINING SOME THERMODYNAMIC PARAMETERS CONTAINING ME AINING METACRYLATE AND ALL TE AND ALLYL GROUPS CON YL GROUPS CONTAINING IN COMPOSITION

The article discusses the results of studying the material composition and the development of technology for processing gold-bearing sulfide ore samples. The material composition of the ore samples was studied by spectral, chemical, assay and rational analysis of gold and silver. Based on a study of the material composition of the ore samples, the following conclusions were made: gold and silver are the industry's most valuable components. It is shown that the use of sulfuric acid treatment of a cinder of graviofloraf concentrate can allow to improve the technological performance of the process. As a result of the mixture of gravio-flotation concentrate after sulfuric acid treatment drying, grinding to a size of 95% CL. -0,074+0 mm and subjected to sorption cyanidation. In the initial cake, the content of gold -77.83 u. e. and silver-16.3 u. e., the concentration of sodium cyanide 0.15%, the ratio W:t=2:1; resin AM-2B-5% of the pulp volume, the duration of cyanidation 36 hours.the Content in the tailings of cyanidation of gold - 6.5 u. e., and silver - 4.8 u. e. the Extraction of noble metals in solution and on the resin was 91.65 and 70.55%, respectively. Through extraction of 87.63% gold and 55.6% silver from ore.