聚砜分子量对环氧/聚砜粘合剂与纤维粘接性能的影响

Y. Gorbatkina, O. Zhuravleva, V. G. Ivanova-Mumzhieva, V. Chebotarev
{"title":"聚砜分子量对环氧/聚砜粘合剂与纤维粘接性能的影响","authors":"Y. Gorbatkina, O. Zhuravleva, V. G. Ivanova-Mumzhieva, V. Chebotarev","doi":"10.1177/0307174X1804500503","DOIUrl":null,"url":null,"abstract":"The concentration dependences of the adhesive strength, τ, of joints of 150 μm diameter steel wire and modified epoxy binder were investigated. The modifier used was PSK-1 polysulphone of different molecular weight, M. The concentration, C, of PSK-1 was varied from 5 to 20 wt%. It was shown that the form of the τ-C curves changes with change in M. At M = 5000 and 10 000, τ is not dependent on C; at M = 17 000 and 27 000, the τ-C relationship is described by a curve with a maximum. At M = 35 000 and 42 000, the adhesive strength decreases with increase in C. The factors affecting the measured value of τ in the case of epoxides modified with heat-resistant thermoplastics are considered.","PeriodicalId":14443,"journal":{"name":"International polymer science and technology","volume":"11 1","pages":"201-204"},"PeriodicalIF":0.0000,"publicationDate":"2018-09-04","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"The Influence of the Molecular Weight of Polysulphone on the Adhesion of Epoxy/Polysulphone Binders to Fibres:\",\"authors\":\"Y. Gorbatkina, O. Zhuravleva, V. G. Ivanova-Mumzhieva, V. Chebotarev\",\"doi\":\"10.1177/0307174X1804500503\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The concentration dependences of the adhesive strength, τ, of joints of 150 μm diameter steel wire and modified epoxy binder were investigated. The modifier used was PSK-1 polysulphone of different molecular weight, M. The concentration, C, of PSK-1 was varied from 5 to 20 wt%. It was shown that the form of the τ-C curves changes with change in M. At M = 5000 and 10 000, τ is not dependent on C; at M = 17 000 and 27 000, the τ-C relationship is described by a curve with a maximum. At M = 35 000 and 42 000, the adhesive strength decreases with increase in C. The factors affecting the measured value of τ in the case of epoxides modified with heat-resistant thermoplastics are considered.\",\"PeriodicalId\":14443,\"journal\":{\"name\":\"International polymer science and technology\",\"volume\":\"11 1\",\"pages\":\"201-204\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2018-09-04\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"International polymer science and technology\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1177/0307174X1804500503\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"International polymer science and technology","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1177/0307174X1804500503","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
引用次数: 2

摘要

研究了150 μm直径钢丝与改性环氧胶结剂接头的粘接强度τ随浓度的变化规律。改性剂为不同分子量的PSK-1聚砜m, PSK-1的浓度C在5% ~ 20%之间变化。结果表明,τ-C曲线的形式随M的变化而变化,在M = 5000和10000时,τ不依赖于C;在M = 17000和27000处,τ-C关系用一条有最大值的曲线来描述。在M = 35 000和42 000时,结合强度随c的增加而降低。考虑了耐热热塑性塑料改性环氧化物时τ测量值的影响因素。
本文章由计算机程序翻译,如有差异,请以英文原文为准。
The Influence of the Molecular Weight of Polysulphone on the Adhesion of Epoxy/Polysulphone Binders to Fibres:
The concentration dependences of the adhesive strength, τ, of joints of 150 μm diameter steel wire and modified epoxy binder were investigated. The modifier used was PSK-1 polysulphone of different molecular weight, M. The concentration, C, of PSK-1 was varied from 5 to 20 wt%. It was shown that the form of the τ-C curves changes with change in M. At M = 5000 and 10 000, τ is not dependent on C; at M = 17 000 and 27 000, the τ-C relationship is described by a curve with a maximum. At M = 35 000 and 42 000, the adhesive strength decreases with increase in C. The factors affecting the measured value of τ in the case of epoxides modified with heat-resistant thermoplastics are considered.
求助全文
通过发布文献求助,成功后即可免费获取论文全文。 去求助
来源期刊
自引率
0.00%
发文量
0
×
引用
GB/T 7714-2015
复制
MLA
复制
APA
复制
导出至
BibTeX EndNote RefMan NoteFirst NoteExpress
×
提示
您的信息不完整,为了账户安全,请先补充。
现在去补充
×
提示
您因"违规操作"
具体请查看互助需知
我知道了
×
提示
确定
请完成安全验证×
copy
已复制链接
快去分享给好友吧!
我知道了
右上角分享
点击右上角分享
0
联系我们:info@booksci.cn Book学术提供免费学术资源搜索服务,方便国内外学者检索中英文文献。致力于提供最便捷和优质的服务体验。 Copyright © 2023 布克学术 All rights reserved.
京ICP备2023020795号-1
ghs 京公网安备 11010802042870号
Book学术文献互助
Book学术文献互助群
群 号:481959085
Book学术官方微信