冲击传感用3K T300碳纤维压电特性的实用表征

2018 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus) Pub Date : 2018-03-15 DOI:10.1109/EICONRUS.2018.8317446

Frank Mischok, O. Durieux, Y. Vagapov, D. Fedyashin

{"title":"冲击传感用3K T300碳纤维压电特性的实用表征","authors":"Frank Mischok, O. Durieux, Y. Vagapov, D. Fedyashin","doi":"10.1109/EICONRUS.2018.8317446","DOIUrl":null,"url":null,"abstract":"This paper discusses the results obtained during the practical characterization of the piezo electric properties of a commonly used carbon fibre. The aim of the investigation was to prepare the grounds for the feasibility of a low cost impact sensor that could be included in any carbon fibre structure (megalithic or thin structure) without interfering the integrity of the actual structure itself. The entire measurement loop as well as the techniques of connectivity of the fibres to the loop is described within. The piezo electric effects and all factors which affect the measurements are reflected in the analysis. The results obtained shown that in normal laboratory conditions the piezo-electric response of a T300 carbon fibre is consistent and directly proportional to the impact applied to the fibre.","PeriodicalId":6562,"journal":{"name":"2018 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus)","volume":"1 1","pages":"1757-1760"},"PeriodicalIF":0.0000,"publicationDate":"2018-03-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"2","resultStr":"{\"title\":\"Practical characterisation of the piezo electric properties of a 3K T300 carbon fibre for impact sensoring\",\"authors\":\"Frank Mischok, O. Durieux, Y. Vagapov, D. Fedyashin\",\"doi\":\"10.1109/EICONRUS.2018.8317446\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"This paper discusses the results obtained during the practical characterization of the piezo electric properties of a commonly used carbon fibre. The aim of the investigation was to prepare the grounds for the feasibility of a low cost impact sensor that could be included in any carbon fibre structure (megalithic or thin structure) without interfering the integrity of the actual structure itself. The entire measurement loop as well as the techniques of connectivity of the fibres to the loop is described within. The piezo electric effects and all factors which affect the measurements are reflected in the analysis. The results obtained shown that in normal laboratory conditions the piezo-electric response of a T300 carbon fibre is consistent and directly proportional to the impact applied to the fibre.\",\"PeriodicalId\":6562,\"journal\":{\"name\":\"2018 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus)\",\"volume\":\"1 1\",\"pages\":\"1757-1760\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2018-03-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"2\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"2018 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus)\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.1109/EICONRUS.2018.8317446\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"2018 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus)","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.1109/EICONRUS.2018.8317446","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 2

摘要

本文讨论了一种常用碳纤维压电性能的实际表征结果。这项研究的目的是为一种低成本的冲击传感器的可行性做准备，这种传感器可以包含在任何碳纤维结构(巨石或薄结构)中，而不会干扰实际结构本身的完整性。整个测量回路以及连接光纤到回路的技术在里面被描述。压电效应和所有影响测量的因素都反映在分析中。结果表明，在正常的实验室条件下，T300碳纤维的压电响应是一致的，并且与施加在纤维上的冲击成正比。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Practical characterisation of the piezo electric properties of a 3K T300 carbon fibre for impact sensoring

This paper discusses the results obtained during the practical characterization of the piezo electric properties of a commonly used carbon fibre. The aim of the investigation was to prepare the grounds for the feasibility of a low cost impact sensor that could be included in any carbon fibre structure (megalithic or thin structure) without interfering the integrity of the actual structure itself. The entire measurement loop as well as the techniques of connectivity of the fibres to the loop is described within. The piezo electric effects and all factors which affect the measurements are reflected in the analysis. The results obtained shown that in normal laboratory conditions the piezo-electric response of a T300 carbon fibre is consistent and directly proportional to the impact applied to the fibre.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

2018 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (EIConRus)

自引率

0.00%

发文量