Hubungan Letak Aksial dan Variasi Ketebalan Papan terhadap Penyusunan Skedul Pengeringan Kayu Cemara Gunung (Casuarina Junghuhniana Miq.) (Relationship Between Axial Location and Board Thickness Variation on the Development of Drying Schedule of Cemara Gunung (Casuarina Junghuhniana Miq.))

The research aim ed to determine drying characteristics, developing drying schedule, and its relationship to the axial position of the sample on the stem , board thickness, specific gravity, and percentage of heartwood. This research used c emara gunung ( Casuarina junghuhniana Miq.) as samples with 6 rep lications and 2 factors that are the axial location (bottom, middle, and top) and board thickness (2 cm , 3 cm , and 4 cm). T he drying schedule development followed the Terazawa Method, in which the samples were dried within a temperature of 100°C for 72 h. The proper schedule was then applied and evaluated. The research obtained 11 variations of the drying schedule. The chi-square analysis results indicated that the board thickness and percentage of heartwood were significantly correlated with the development of the drying schedule. The d rying schedule using board thickness of 2 cm, 3 cm, and 4 cm can be dried with an initial temperature of 60°C, 50°C, and 47°C , respectively. The w et-bulb depression was 4 °C , 2°C, and 2°C, respectively, and the final temperature was 90°C, 80°C , and 65°C, respectively . Keywords: axial, board-thickness, Casuarina junghuhniana , drying-schedule, Terazawa method