L. Gerdes, S. Berger, J. Saelzer, Pascal Franck, Ramon Helwing, A. Zabel, F. Walther
{"title":"面向应用的数字图像相关技术在AISI 1045和Ti6Al4V材料高速变形和断裂分析中的应用","authors":"L. Gerdes, S. Berger, J. Saelzer, Pascal Franck, Ramon Helwing, A. Zabel, F. Walther","doi":"10.3390/applmech3040068","DOIUrl":null,"url":null,"abstract":"In order to achieve realistic simulations of the chip formation, high quality input data regarding the flow stress and damage behavior of the materials are required. The split Hopkinson pressure bar (SHPB) test setup for the characterization of highly dynamic material properties offers a suitable method for generating high strain rates, similar to those in the chip formation zone. However, the strain measurement in SHPB is usually performed by means of strain gauges. This leads to an unreliable evaluation of strain rate and flow stress/shear flow stress in the case of an inhomogeneous material deformation, since this method presents the total strain whilst excluding local deformations. Inhomogeneous deformations are induced deliberately in special shear specimens, as they are also observed in the investigated cylindrical specimens. The present work deals with this issue by providing two additional measurement techniques, which are applied in SHPB tests for cylindrical specimens made of AISI 1045 and Ti6Al4V. To enable a local strain resolution, digital image correlation (DIC) is applied to high-speed images of the deformation process. In order to allow for the detection of shear bands in the specimens, a deep-learning-based approach is presented. The two measurement methods (strain gauges and DIC) are compared and discussed. In particular, the findings regarding the inhomogeneous deformation of Ti6Al4V allow for future improvements in the result quality of SHPB tests. The presented algorithm shows promising predictions for shear band detection and creates the basis for an automated evaluation of shear sample results, as well as an AI-based pre-selection of frames for the DIC evaluation of SHPB tests.","PeriodicalId":8048,"journal":{"name":"Applied Mechanics Reviews","volume":null,"pages":null},"PeriodicalIF":12.2000,"publicationDate":"2022-10-05","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"Application-Oriented Digital Image Correlation for the High-Speed Deformation and Fracture Analysis of AISI 1045 and Ti6Al4V Materials\",\"authors\":\"L. Gerdes, S. Berger, J. Saelzer, Pascal Franck, Ramon Helwing, A. Zabel, F. Walther\",\"doi\":\"10.3390/applmech3040068\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In order to achieve realistic simulations of the chip formation, high quality input data regarding the flow stress and damage behavior of the materials are required. The split Hopkinson pressure bar (SHPB) test setup for the characterization of highly dynamic material properties offers a suitable method for generating high strain rates, similar to those in the chip formation zone. However, the strain measurement in SHPB is usually performed by means of strain gauges. This leads to an unreliable evaluation of strain rate and flow stress/shear flow stress in the case of an inhomogeneous material deformation, since this method presents the total strain whilst excluding local deformations. Inhomogeneous deformations are induced deliberately in special shear specimens, as they are also observed in the investigated cylindrical specimens. The present work deals with this issue by providing two additional measurement techniques, which are applied in SHPB tests for cylindrical specimens made of AISI 1045 and Ti6Al4V. To enable a local strain resolution, digital image correlation (DIC) is applied to high-speed images of the deformation process. In order to allow for the detection of shear bands in the specimens, a deep-learning-based approach is presented. The two measurement methods (strain gauges and DIC) are compared and discussed. In particular, the findings regarding the inhomogeneous deformation of Ti6Al4V allow for future improvements in the result quality of SHPB tests. The presented algorithm shows promising predictions for shear band detection and creates the basis for an automated evaluation of shear sample results, as well as an AI-based pre-selection of frames for the DIC evaluation of SHPB tests.\",\"PeriodicalId\":8048,\"journal\":{\"name\":\"Applied Mechanics Reviews\",\"volume\":null,\"pages\":null},\"PeriodicalIF\":12.2000,\"publicationDate\":\"2022-10-05\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Applied Mechanics Reviews\",\"FirstCategoryId\":\"5\",\"ListUrlMain\":\"https://doi.org/10.3390/applmech3040068\",\"RegionNum\":1,\"RegionCategory\":\"工程技术\",\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"Q1\",\"JCRName\":\"MECHANICS\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Applied Mechanics Reviews","FirstCategoryId":"5","ListUrlMain":"https://doi.org/10.3390/applmech3040068","RegionNum":1,"RegionCategory":"工程技术","ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"Q1","JCRName":"MECHANICS","Score":null,"Total":0}
Application-Oriented Digital Image Correlation for the High-Speed Deformation and Fracture Analysis of AISI 1045 and Ti6Al4V Materials
In order to achieve realistic simulations of the chip formation, high quality input data regarding the flow stress and damage behavior of the materials are required. The split Hopkinson pressure bar (SHPB) test setup for the characterization of highly dynamic material properties offers a suitable method for generating high strain rates, similar to those in the chip formation zone. However, the strain measurement in SHPB is usually performed by means of strain gauges. This leads to an unreliable evaluation of strain rate and flow stress/shear flow stress in the case of an inhomogeneous material deformation, since this method presents the total strain whilst excluding local deformations. Inhomogeneous deformations are induced deliberately in special shear specimens, as they are also observed in the investigated cylindrical specimens. The present work deals with this issue by providing two additional measurement techniques, which are applied in SHPB tests for cylindrical specimens made of AISI 1045 and Ti6Al4V. To enable a local strain resolution, digital image correlation (DIC) is applied to high-speed images of the deformation process. In order to allow for the detection of shear bands in the specimens, a deep-learning-based approach is presented. The two measurement methods (strain gauges and DIC) are compared and discussed. In particular, the findings regarding the inhomogeneous deformation of Ti6Al4V allow for future improvements in the result quality of SHPB tests. The presented algorithm shows promising predictions for shear band detection and creates the basis for an automated evaluation of shear sample results, as well as an AI-based pre-selection of frames for the DIC evaluation of SHPB tests.
期刊介绍:
Applied Mechanics Reviews (AMR) is an international review journal that serves as a premier venue for dissemination of material across all subdisciplines of applied mechanics and engineering science, including fluid and solid mechanics, heat transfer, dynamics and vibration, and applications.AMR provides an archival repository for state-of-the-art and retrospective survey articles and reviews of research areas and curricular developments. The journal invites commentary on research and education policy in different countries. The journal also invites original tutorial and educational material in applied mechanics targeting non-specialist audiences, including undergraduate and K-12 students.