O. I. Abramushkina, E. A. Romakhova, I. N. Tsapenko
{"title":"掺有白垩精矿的高密度聚乙烯与低密度聚乙烯混合膜的力学性能研究","authors":"O. I. Abramushkina, E. A. Romakhova, I. N. Tsapenko","doi":"10.35164/0554-2901-2023-1-2-35-38","DOIUrl":null,"url":null,"abstract":"The deformation-strength characteristics of films made from a mixture of HDPE and LLDPE modified with chalk were studied. It is shown that the introduction of a chalk concentrate of more than 16 wt.% (the content of chalk concentrate is 20 wt.%) has a negative effect on the strength and relative elongation at break of the composition of HDPE with LLDPE, as well as on the strength of the welded joint of polymer films. The strength of the films in the longitudinal and transverse directions significantly depends on the composition of the composition. The strength of the weld, obtained by ultrasonic welding, decreases sharply when the chalk content in the system is more than 16 wt.%. The introduction of more than 10 wt.% LLDPE into a HDPE-based chalk-filled composition is inadvisable..","PeriodicalId":20254,"journal":{"name":"Plasticheskie massy","volume":"23 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2023-03-25","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Investigation of the mechanical properties of films from a mixture of HDPE with LLDPE with the addition of chalk concentrate\",\"authors\":\"O. I. Abramushkina, E. A. Romakhova, I. N. Tsapenko\",\"doi\":\"10.35164/0554-2901-2023-1-2-35-38\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The deformation-strength characteristics of films made from a mixture of HDPE and LLDPE modified with chalk were studied. It is shown that the introduction of a chalk concentrate of more than 16 wt.% (the content of chalk concentrate is 20 wt.%) has a negative effect on the strength and relative elongation at break of the composition of HDPE with LLDPE, as well as on the strength of the welded joint of polymer films. The strength of the films in the longitudinal and transverse directions significantly depends on the composition of the composition. The strength of the weld, obtained by ultrasonic welding, decreases sharply when the chalk content in the system is more than 16 wt.%. The introduction of more than 10 wt.% LLDPE into a HDPE-based chalk-filled composition is inadvisable..\",\"PeriodicalId\":20254,\"journal\":{\"name\":\"Plasticheskie massy\",\"volume\":\"23 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2023-03-25\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Plasticheskie massy\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.35164/0554-2901-2023-1-2-35-38\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Plasticheskie massy","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.35164/0554-2901-2023-1-2-35-38","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}
Investigation of the mechanical properties of films from a mixture of HDPE with LLDPE with the addition of chalk concentrate
The deformation-strength characteristics of films made from a mixture of HDPE and LLDPE modified with chalk were studied. It is shown that the introduction of a chalk concentrate of more than 16 wt.% (the content of chalk concentrate is 20 wt.%) has a negative effect on the strength and relative elongation at break of the composition of HDPE with LLDPE, as well as on the strength of the welded joint of polymer films. The strength of the films in the longitudinal and transverse directions significantly depends on the composition of the composition. The strength of the weld, obtained by ultrasonic welding, decreases sharply when the chalk content in the system is more than 16 wt.%. The introduction of more than 10 wt.% LLDPE into a HDPE-based chalk-filled composition is inadvisable..