根据印尼的规定计算GT渔船和计算机建模(MUNCAR和PRIGI渔船的案例研究)

海洋渔业 Pub Date : 2019-11-01 DOI:10.29244/JMF.V10I2.29495

S. Sunardi, Ach. Baidowi, E. Yulianto

{"title":"根据印尼的规定计算GT渔船和计算机建模(MUNCAR和PRIGI渔船的案例研究)","authors":"S. Sunardi, Ach. Baidowi, E. Yulianto","doi":"10.29244/JMF.V10I2.29495","DOIUrl":null,"url":null,"abstract":"A gross tonnage (GT) is a volume capacity of fishing vessel regarding its role in the fisheries resource utilization and management affairs. Information regarding GT is important, hence there is a need to conduct measurement in objective manner. The result of GT recalculation conducted by the Ministry of Transportation on under 30 GT fishing vessels showed that there is a significant difference between the documented GT and recalculated GT which indicates a massive mark down. Consequently, most of owners decline the later result as it goes higher and has impact on operational cost. Regarding that problem, this paper investigates the GT calculation process in Indonesia. In order to provide objective measurement, this research compares the existing GT calculation method and numerical computation. The result reveals that both methods produced different GT, which is about 32% gap for fishing vessels in Muncar and 27% gap in Prigi.Keywords: Gross tonnage, fishing boat, measurement, numerical computation","PeriodicalId":59401,"journal":{"name":"海洋渔业","volume":"82 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2019-11-01","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"1","resultStr":"{\"title\":\"PERHITUNGAN GT KAPAL IKAN BERDASARKAN PERATURAN DI INDONESIA DAN PEMODELAN KAPAL DENGAN DIBANTU KOMPUTER (STUDI KASUS KAPAL IKAN MUNCAR DAN PRIGI)\",\"authors\":\"S. Sunardi, Ach. Baidowi, E. Yulianto\",\"doi\":\"10.29244/JMF.V10I2.29495\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"A gross tonnage (GT) is a volume capacity of fishing vessel regarding its role in the fisheries resource utilization and management affairs. Information regarding GT is important, hence there is a need to conduct measurement in objective manner. The result of GT recalculation conducted by the Ministry of Transportation on under 30 GT fishing vessels showed that there is a significant difference between the documented GT and recalculated GT which indicates a massive mark down. Consequently, most of owners decline the later result as it goes higher and has impact on operational cost. Regarding that problem, this paper investigates the GT calculation process in Indonesia. In order to provide objective measurement, this research compares the existing GT calculation method and numerical computation. The result reveals that both methods produced different GT, which is about 32% gap for fishing vessels in Muncar and 27% gap in Prigi.Keywords: Gross tonnage, fishing boat, measurement, numerical computation\",\"PeriodicalId\":59401,\"journal\":{\"name\":\"海洋渔业\",\"volume\":\"82 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-11-01\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"1\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"海洋渔业\",\"FirstCategoryId\":\"1091\",\"ListUrlMain\":\"https://doi.org/10.29244/JMF.V10I2.29495\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"海洋渔业","FirstCategoryId":"1091","ListUrlMain":"https://doi.org/10.29244/JMF.V10I2.29495","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 1

摘要

总吨位是指渔船在渔业资源利用和管理事务中的容积能力。关于GT的信息很重要，因此有必要以客观的方式进行测量。交通部对30艘GT以下的渔船重新计算GT的结果表明，记录的GT与重新计算的GT之间存在显著差异，表明大幅减记。因此，大多数业主拒绝后者的结果，因为它变得更高，并对运营成本产生影响。针对这一问题，本文研究了印度尼西亚的GT计算过程。为了提供客观的测量结果，本研究将现有的GT计算方法与数值计算方法进行了比较。结果表明，两种方法产生的GT不同，Muncar的差距约为32%，Prigi的差距约为27%。关键词:总吨位，渔船，测量，数值计算

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

PERHITUNGAN GT KAPAL IKAN BERDASARKAN PERATURAN DI INDONESIA DAN PEMODELAN KAPAL DENGAN DIBANTU KOMPUTER (STUDI KASUS KAPAL IKAN MUNCAR DAN PRIGI)

A gross tonnage (GT) is a volume capacity of fishing vessel regarding its role in the fisheries resource utilization and management affairs. Information regarding GT is important, hence there is a need to conduct measurement in objective manner. The result of GT recalculation conducted by the Ministry of Transportation on under 30 GT fishing vessels showed that there is a significant difference between the documented GT and recalculated GT which indicates a massive mark down. Consequently, most of owners decline the later result as it goes higher and has impact on operational cost. Regarding that problem, this paper investigates the GT calculation process in Indonesia. In order to provide objective measurement, this research compares the existing GT calculation method and numerical computation. The result reveals that both methods produced different GT, which is about 32% gap for fishing vessels in Muncar and 27% gap in Prigi.Keywords: Gross tonnage, fishing boat, measurement, numerical computation

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

海洋渔业

自引率

0.00%

发文量

4336

期刊介绍： “Marine Fisheries”started publication in 1979, it mainly covers original research papers and reviews on basic theories and applications of aquaculture and fisheries, including marine biology, mariculture and reproduction, aquatic diseases and prevention, nutrition and feed of aquatic organisms, fishery ecology and environmental protection, development and conservation of marine fishery resources, fishing tools and methods, preservation and comprehensive utilization of aquatic products, fishery machinery and instruments.