Cerium Bromide Single-Crystal X-Ray Detection and Spectral Compatibility Assessment with Various Optical Sensors

Scintillators with high light yield (LY) values are of interest for medical imaging applications, in harsh environments, nondestructive testing (NDT), etc. CeBr3 has a LY of 60000 photons per MeV, a value much higher than other efficient materials, such as Lu3Al5O12:Ce (25000 photons/MeV); thus, its X-ray detection properties would be of interest to be examined for medical imaging applications. The X-ray detection and absorption properties of a single crystal CeBr3 sample along with the compatibility of its produced light with various optoelectronic sensors were examined. In this study, the quantum detection (QDE) and the energy absorption efficiency (EAE) of CeBr3 were calculated. The findings were compared with data for 10 × 10 × 10   m m 3 Lu3Al5O12:Ce and CaF2:Eu single crystals. The measured optical spectrum produced by CeBr3 was well correlated with the spectral response of commercial optical sensors, yielding spectral matching higher than 93% for various photocathodes, e.g., GaAs (94%), E-S20 (95%), and bialkali and multialkali (95-97%), as well as with flat panel position-sensitive photomultipliers (95-99%). The energy absorption properties of CeBr3 were found higher than those of Lu3Al5O12:Ce and CaF2:Eu for X-ray tube voltages greater than 100 kVp. The quantum detection efficiency was 100% across the examined energy range. Even though CeBr3 is hygroscopic and has a mediocre 5.1 g/cm3 density, the QDE, EAE, and spectral correlation results are promising for medical imaging applications.