制备高强度钢板的试验研究

The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science Pub Date : 2020-06-15 DOI:10.35219/mms.2020.2.04

M. Bordei, B. Carp

{"title":"制备高强度钢板的试验研究","authors":"M. Bordei, B. Carp","doi":"10.35219/mms.2020.2.04","DOIUrl":null,"url":null,"abstract":"The normalizing of ferritic-pearlitic steels is a heat treatment, which consist of reheating into the austenite and subsequent air-cooling. For greater thickness, e.g. 100 mm, variations in the requirements may be permitted or required for particular applications but a reduction of the required impact energy is not allowed. The most important cote of the cost can be eliminated if the process normalizing rolling is applied.","PeriodicalId":22358,"journal":{"name":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","volume":"13 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2020-06-15","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"Experiments Regarding the Fabrication of the Higher Strength Steels Plates\",\"authors\":\"M. Bordei, B. Carp\",\"doi\":\"10.35219/mms.2020.2.04\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"The normalizing of ferritic-pearlitic steels is a heat treatment, which consist of reheating into the austenite and subsequent air-cooling. For greater thickness, e.g. 100 mm, variations in the requirements may be permitted or required for particular applications but a reduction of the required impact energy is not allowed. The most important cote of the cost can be eliminated if the process normalizing rolling is applied.\",\"PeriodicalId\":22358,\"journal\":{\"name\":\"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science\",\"volume\":\"13 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2020-06-15\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.35219/mms.2020.2.04\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.35219/mms.2020.2.04","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

铁素体-珠光体钢的正火是一种热处理，它由再加热到奥氏体和随后的空冷组成。对于更大的厚度，例如100mm，对于特定应用，允许或需要改变要求，但不允许减少所需的冲击能量。如果采用正火轧制工艺，可以消除最重要的成本。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

Experiments Regarding the Fabrication of the Higher Strength Steels Plates

The normalizing of ferritic-pearlitic steels is a heat treatment, which consist of reheating into the austenite and subsequent air-cooling. For greater thickness, e.g. 100 mm, variations in the requirements may be permitted or required for particular applications but a reduction of the required impact energy is not allowed. The most important cote of the cost can be eliminated if the process normalizing rolling is applied.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

The Annals of “Dunarea de Jos” University of Galati. Fascicle IX, Metallurgy and Materials Science

自引率

0.00%

发文量

审稿时长

8 weeks