按照en1995-1-1和GSN В.1.2-2:2006的要求设计屋面复合蒙皮板

Zbirnik naukovikh prats'' Seriia Galuzeve mashinobuduvannia budivnitstvo Pub Date : 2019-10-31 DOI:10.26906/znp.2019.53.1887

S. Pichugin, Sergiy Shkirenko, M. Pents

{"title":"按照en1995-1-1和GSN В.1.2-2:2006的要求设计屋面复合蒙皮板","authors":"S. Pichugin, Sergiy Shkirenko, M. Pents","doi":"10.26906/znp.2019.53.1887","DOIUrl":null,"url":null,"abstract":"In the article design of composite (timber and plywood) skin panel has been considered according European and nationalstandards. The panel consists of timber webs and plywood skin. The design parameters are depth of webs and distance between webs within the defined skin parameters. In design the method of fictitious cross-section is applied. Check of the ultimate limit states is conducted in accordance with EN 1995-1-1 (ДБН В.2.6-161:2017). Loads to the panel are determined according to ДБН В.1.2.-2:2006. The usage of European and national standards complies with the actual requirements andwiden methodological base.","PeriodicalId":32910,"journal":{"name":"Zbirnik naukovikh prats'' Seriia Galuzeve mashinobuduvannia budivnitstvo","volume":"15 1","pages":""},"PeriodicalIF":0.0000,"publicationDate":"2019-10-31","publicationTypes":"Journal Article","fieldsOfStudy":null,"isOpenAccess":false,"openAccessPdf":"","citationCount":"0","resultStr":"{\"title\":\"DESIGN OF COMPOSITE SKIN PANEL FOR ROOF IN ACCORDANCE WITH THE REQUIREMENTS OF EN 1995-1-1 AND GSN В.1.2-2:2006\",\"authors\":\"S. Pichugin, Sergiy Shkirenko, M. Pents\",\"doi\":\"10.26906/znp.2019.53.1887\",\"DOIUrl\":null,\"url\":null,\"abstract\":\"In the article design of composite (timber and plywood) skin panel has been considered according European and nationalstandards. The panel consists of timber webs and plywood skin. The design parameters are depth of webs and distance between webs within the defined skin parameters. In design the method of fictitious cross-section is applied. Check of the ultimate limit states is conducted in accordance with EN 1995-1-1 (ДБН В.2.6-161:2017). Loads to the panel are determined according to ДБН В.1.2.-2:2006. The usage of European and national standards complies with the actual requirements andwiden methodological base.\",\"PeriodicalId\":32910,\"journal\":{\"name\":\"Zbirnik naukovikh prats'' Seriia Galuzeve mashinobuduvannia budivnitstvo\",\"volume\":\"15 1\",\"pages\":\"\"},\"PeriodicalIF\":0.0000,\"publicationDate\":\"2019-10-31\",\"publicationTypes\":\"Journal Article\",\"fieldsOfStudy\":null,\"isOpenAccess\":false,\"openAccessPdf\":\"\",\"citationCount\":\"0\",\"resultStr\":null,\"platform\":\"Semanticscholar\",\"paperid\":null,\"PeriodicalName\":\"Zbirnik naukovikh prats'' Seriia Galuzeve mashinobuduvannia budivnitstvo\",\"FirstCategoryId\":\"1085\",\"ListUrlMain\":\"https://doi.org/10.26906/znp.2019.53.1887\",\"RegionNum\":0,\"RegionCategory\":null,\"ArticlePicture\":[],\"TitleCN\":null,\"AbstractTextCN\":null,\"PMCID\":null,\"EPubDate\":\"\",\"PubModel\":\"\",\"JCR\":\"\",\"JCRName\":\"\",\"Score\":null,\"Total\":0}","platform":"Semanticscholar","paperid":null,"PeriodicalName":"Zbirnik naukovikh prats'' Seriia Galuzeve mashinobuduvannia budivnitstvo","FirstCategoryId":"1085","ListUrlMain":"https://doi.org/10.26906/znp.2019.53.1887","RegionNum":0,"RegionCategory":null,"ArticlePicture":[],"TitleCN":null,"AbstractTextCN":null,"PMCID":null,"EPubDate":"","PubModel":"","JCR":"","JCRName":"","Score":null,"Total":0}

引用次数: 0

摘要

本文根据欧洲和国家标准对复合材料(木材和胶合板)蒙皮板的设计进行了考虑。面板由木材网和胶合板表皮组成。设计参数是在定义的蒙皮参数内腹板的深度和腹板之间的距离。在设计中采用了虚拟截面法。根据EN 1995-1-1 (ДБН В.2.6-161:2017)对极限状态进行检查。面板上的负载根据ДБН В.1.2.-2:2006确定。欧洲和国家标准的使用符合实际要求，并扩大了方法基础。

本文章由计算机程序翻译，如有差异，请以英文原文为准。

查看原文本刊更多论文

DESIGN OF COMPOSITE SKIN PANEL FOR ROOF IN ACCORDANCE WITH THE REQUIREMENTS OF EN 1995-1-1 AND GSN В.1.2-2:2006

In the article design of composite (timber and plywood) skin panel has been considered according European and nationalstandards. The panel consists of timber webs and plywood skin. The design parameters are depth of webs and distance between webs within the defined skin parameters. In design the method of fictitious cross-section is applied. Check of the ultimate limit states is conducted in accordance with EN 1995-1-1 (ДБН В.2.6-161:2017). Loads to the panel are determined according to ДБН В.1.2.-2:2006. The usage of European and national standards complies with the actual requirements andwiden methodological base.

求助全文

通过发布文献求助，成功后即可免费获取论文全文。去求助

来源期刊

Zbirnik naukovikh prats'' Seriia Galuzeve mashinobuduvannia budivnitstvo

自引率

0.00%

发文量

审稿时长

24 weeks