Quality and Environmental Impact Assessment of Coal Deposits of Punjab Pakistan

Major coal fields in Punjab Province are located in the Salt and Surghar ranges, whose collective reserves are 235 million tons. Representative coal samples were collected from Makarwal, Kallar Kahar and Dandot for assessment of quality and its impact on environment during combustion. The coal was classified as sub-bituminous type on the basis of proximate analysis. Average measured calorific values were noted 6801, 5624 and 6415 Btu/lb for Makarwal, Kallar Kahar and Dandot samples respectively. Moderate moisture, volatiles, fixed carbon and low ash designate it as suitable material for electric generation and cement manufacturing. The average sulfur content of all samples was appeared as 5.13%, which is high for power generation and other allied industries. The combustion of this coal may pose threat to the environment in the region due to the presence of high sulfur and other trace elements like Al, Cr, Fe, Zn, Mn, Cu, Sn, and Ni in appreciable quantities. Appropriate measure is essential to substantially reduce sulfur and these trace elements before using it in the power generation plants and other industries of Pakistan