Optimal strengthening by steel truss arches in prestressed girder bridges

This work focuses on the proposal and the evaluation of a new consolidation system for prestressed reinforced concrete (PRC) beams of girder bridges. The system consists of two arch-shaped steel trusses placed alongside the lateral faces of the beam to beconsolidated. The arches develop longitudinally along the entire span of the beam and in elevation using the available height of the PRC cross section. The consolidation system is characterized by its own external constraints, independent from those serving the pre-existing element. The efficiency of the system with respect to parameters variability is described also focusing on the ratio between the load discharged by the consolidation system and the total applied load. Referring to a case study, the consolidation of a PRC beam is presented adopting the proposed system with respect to the usually adopted external prestressing technique. The cross sections properties of the steel arch shaped trusses are defined by means of a structural optimization process using a genetic algorithm, identifying the minimum steel consumption. Finally, a preliminary cost-benefit analysis is performed for the proposed solution for a comparison with other commonly adopted techniques.